Yearbooks

Programme: BSc Environmental and Engineering Geology

Kindly take note of the disclaimer regarding qualifications and degree names.
Code Faculty
02133042 Faculty of Natural and Agricultural Sciences
Credits Duration
Duration of study: 3 years Total credits: 432

Admission requirements

  •  In order to register NSC/IEB/Cambridge candidates must comply with the minimum requirements for degree studies as well as the minimum requirements for the relevant study programme. 
  • Life Orientation is excluded in the calculation of the Admission Point Score (APS).
  • Grade 11 results are used for the provisional admission of prospective students.
  • Final admission is based on the Grade 12 results.

 

Minimum requirements for 2016
Achievement level
Afrikaans or English Mathematics Physical Sciences APS
NSC/IEB HIGCSE AS-Level A-Level NSC/IEB HIGCSE AS-Level A-Level NSC/IEB HIGCSE AS-Level A-Level
5 3 C C 5 3 C C 5 3 C C 32
 
Candidates who do not comply with the minimum admission requirements may be considered for admission to the BSc or the BSc (Four-year Programme) based on the results of the NBT.

 

Other programme-specific information

Students may enrol for AIM 111 and AIM 121 instead of AIM 102 (the same content presented over 2 semesters).

Students will be informed timeously of compulsory excursions that could take place during the vacations. The attendance of excursions for first-year students is compulsory, while excursions of longer duration are compulsory for senior students.

Electives can be chosen from the following departments: Geography, Geoinformatics and Meteorology, Plant Production and Soil Science, Chemistry, Mathematics and Applied Mathematics and Physics.

 

Electives are chosen as follows:

Second year – 36 credits

Third year – 28 credits

A student must pass all the minimum prescribed and elective module credits as set out at the end of each year within a programme as well as the total required credits to comply with the particular degree programme. Please refer to the curricula of the respective programmes. At least 144 credits must be obtained at 300-/400-level, or otherwise as indicated by curriculum. The minimum module credits needed to comply with degree requirements is set out at the end of each study programme. Subject to the programmes as indicated a maximum of 150 credits will be recognised at 100-level. A student may, in consultation with the Head of Department and subject to the permission by the Dean, select or replace prescribed module credits not indicated in BSc three-year study programmes to the equivalent of a maximum of 36 module credits.

It is important that the total number of prescribed module credits is completed during the course of the study programme. The Dean may, on the recommendation of the Head of Department, approve deviations in this regard. Subject to the programmes as indicated in the respective curricula, a student may not register for more than 75 module credits per semester at first-year level subject to permission by the Dean. A student may be permitted to register for up to 80 module credits in a the first semester during the first year provided that he or she obtained a final mark of no less than 70% for grade 12 Mathematics and achieved an APS of 34 or more in the NSC.

Students who are already in possession of a bachelor’s degree, will not receive credit for modules of which the content overlap with modules from the degree that was already conferred. Credits will not be considered for more than half the credits passed previously for an uncompleted degree. No credits at the final-year or 300- and 400-level will be granted.

The Dean may, on the recommendation of the programme manager, approve deviations with regard to the composition of the study programme.

Please note: Where elective modules are not specified, these may be chosen from any modules appearing in the list of modules.

It remains the student’s responsibility to acertain, prior to registration, whether they comply with the prerequisites of the modules they want to register for.

The prerequisites are listed in the Alphabetical list of modules.

Transitional measures

Transitional measures for Mathematics modules for 2016

  • Students who would have registered for any of the degrees BSc in Environmental Sciences, Geography, Geoinformatics, BCom, BCom in Economics/Statistics or BScIT Information and Knowledge Systems prior to 2016, and not successfully completed WTW 114, WTW 126 or WTW 128 will be allowed to register for WTW 134, WTW 146 and WTW 148, respectively.
  • Students who would have registered for BSc in Geology prior to 2016, and not successfully completed WTW 114, WTW 126 or WTW 128 will be allowed to register for WTW 158, WTW 164 or WTW 124 or WTW 148, respectively.
  • Students who registered prior to 2016, and who failed both WTW 126 and WTW 128 will register for WTW 124 in 2016 if they wish to continue with mathematics at 200 level, or if WTW 126 and WTW 128 are required for their respective degree programmes.
  • Students who do not qualify for WTW 146 and WTW 148 in terms of their degree programmes, and failed one of WTW 126 or WTW 128, will be allowed to register for the respective module in 2016, and will attend the relevant lectures and tutorials of WTW 124. They will write separate semester tests and exams, covering just the relevant material from WTW 124.
  • Students who registered prior to 2016 and passed WTW 126 but not WTW 128, will be allowed to continue with WTW 211 and COS 344 in 2016.
  • Students who registered prior to 2016 and passed WTW 128 but not WTW 126, will be allowed to continue with the modules WTW 220, IAS 211 and GLY 265 in 2016, if they also meet the additional entry requirements.
  • Students who registered prior to 2016, and who failed both WTW 161 and WTW 168 will register for WTW 164 in 2016. 
  • Students who failed one of WTW 161 or WTW 168, will be allowed to register for the respective module in 2016, and will attend the relevant lectures and tutorials of WTW 164. They will write separate semester tests and exams, covering just the relevant material from WTW 164.

Promotion to next study year

A student will be promoted to the following year of study if he or she passed 100 credits of the prescribed credits for a year of study, unless the Dean on the recommendation of the head of department decides otherwise. A student who does not comply with the requirements for promotion to the following year of study, retains the credit for the modules already passed and may be admitted by the Dean, on recommendation of the head of department, to modules of the following year of study to a maximum of 48 credits, provided that it will fit in with both the lecture and examination timetable.

General promotion requirements in the faculty
All students whose academic progress is not acceptable can be suspended from further studies.

  • A student who is excluded from further studies in terms of the stipulations of the abovementioned regulations, will be notified in writing by the Dean or Admissions Committee at the end of the relevant semester.
  • A student who has been excluded from further studies may apply in writing to the Admissions Committee of the Faculty of Natural and Agricultural Sciences for re-admission.
  • Should the student be re-admitted by the Admissions Committee, strict conditions will be set which the student must comply with in order to proceed with his/her studies.
  • Should the student not be re-admitted to further studies by the Admissions Committee, he/she will be informed in writing.
  • Students who are not re-admitted by the Admissions Committee have the right to appeal to the Senior Appeals Committee.
  • Any decision taken by the Senior Appeals Committee is final.

Pass with distinction

A student obtains his or her degree with distinction if all prescribed modules at 300-level (or higher) are passed in one academic year with a weighted average of at least 75%, and obtain at least a subminimum of 65% in each of the relevant modules.

Minimum credits: 140

Fundamental modules

Core modules

  • Module content:

    General introduction to inorganic, analytical and physical chemistry. Atomic structure and periodicity. Molecular structure and chemical bonding using the VSEOR model. Nomenclature of iorganic ions and compounds. Classification of reactions: precipitation, acid-base, redox reactions and gas-forming reactions. Mole concept and stoichiometric calculations concerning chemical formulas and chemical reactions. Principles of reactivity: energy and chemical reactions. Physical behaviour gases, liquids, solids and solutions and the role of intermolecular forces. Rate of reactions: Introduction to chemical kinetics.

    View more

  • Module content:

    Theory: General physical-analytical chemistry: Physical behaviour of gases, liquids and solids, intermolecular forces, solutions. Principles of reactivity: energy and chemical reactions, entropy and free energy, electrochemistry. Organic chemistry: Structure (bonding), nomenclature, isomerism, introductory stereochemistry, introduction to chemical reactions and chemical properties of organic compounds and biological compounds, i.e. carbohydrates and amino acids. Practical: Molecular structure (model building), synthesis and properties of simple organic compounds.

    View more

  • Module content:

    Principles of stratigraphy and stratigraphic nomenclature; geological dating and international and South African time scales; Africa framework and tectonic elements of South Africa; introduction to depositional environments. Overview of the historical geology of South Africa, from the Archaean to the present: major stratigraphic units, intrusions and tectonicmetamorphic events - their rock types, fossil contents, genesis and economic commodities. Principles of palaeontology and short description of major fossil groups: fossil forms, ecology and geological meaning. Geological maps and profiles; rock samples.

    View more

  • Module content:

    Hazardous exogenic and endogenic geological processes and their influence on the human environment; impact of human activities on the geological environment; natural resource utilisation including materials for construction; natural and mine-induced seismicity; waste disposal; groundwater and environmental pollution. Geological maps; geological profiles; rock specimens; fossil specimens.

    View more

  • Module content:

    Equivalent force systems, resultants. Newton's laws, units. Forces acting on particles. Rigid bodies: principle of transmissibility, resultant of parallel forces. Vector moments and scalar moments. Relationship between scalar- and vector moments. Couples. Equivalent force systems on rigid bodies. Resultants of forces on rigid bodies. Equilibrium in two and three dimensions. Hooke's law. Trusses and frameworks. Centroids and second moments of area. Beams: distributed forces, shear force, bending moment, method of sections, relationship between load, shear force and bending moment.

    View more

  • Module content:

    *This module is designed for first-year engineering students. Students will not be credited for more than one of the following modules for their degree: WTW 158, WTW 114, WTW 134, WTW 165.
    Introduction to vector algebra. Functions, limits and continuity. Differential calculus of single variable functions, rate of change, graph sketching, applications. The mean value theorem, the rule of L'Hospital. Indefinite integrals, integration.

    View more

  • Module content:

    Solar system; structure of solid matter; minerals and rocks; introduction to symmetry and crystallography; important minerals and solid solutions; rock cycle; classification of rocks. External geological processes (gravity, water, wind, sea, ice) and their products (including geomorphology). Internal structure of the earth. The dynamic earth – volcanism, earthquakes, mountain building – the theory of plate tectonics. Geological processes (magmatism, metamorphism, sedimentology, structural geology) in a plate tectonic context. Geological maps and mineral and rock specimens.

    View more

  • Module content:

    SI-units. Significant figures. Waves: intensity, superposition, interference, standing waves, resonance, beats, Doppler. Geometrical optics: Reflection, refraction, mirrors, thin lenses, instruments. Physical optics: Young-interference, coherence, diffraction, polarisation. Hydrostatics and dynamics: density, pressure, Archimedes’ principle, continuity, Bernoulli. Heat: temperature, specific heat, expansion, heat transfer. Vectors. Kinematics of a point: Relative, projectile, and circular motion. Dynamics: Newton’s laws, friction. Work: point masses, gasses (ideal gas law), gravitation, spring, power. Kinetic energy: Conservative forces, gravitation, spring. Conservation of energy. Conservation of momentum. Impulse and collisions. System of particles: Centre of mass, Newton’s laws. Rotation: torque, conservation of angular momentum, equilibrium, centre of gravity.

    View more

  • Module content:

    *This module is designed for first-year engineering students. Students will not be credited for more than one of the following modules for their degree: WTW 146, WTW 148 and WTW 124,

    Vector algebra with applications to lines and planes in space, matrix algebra, systems of linear equations, determinants, complex numbers, factorisation of polynomials and conic sections. Integration techniques, improper integrals. The definite integral, fundamental theorem of Calculus. Applications of integration. Elementary power series and Taylor’s theorem. Vector functions, space curves and arc lengths. Quadratic surfaces and multivariable functions.

    View more

Minimum credits: 148

Core modules

  • Module content:

    Origin and development of soil, weathering and soil formation processes. Profile differentiation and morphology. Physical characteristics: texture, structure, soil water, atmosphere and temperature. Chemical characteristics: clay minerals, ion exchange, pH, buffer action, soil acidification and salinisation of soil. Soil fertility and fertilisation. Soil classification. Practical work: Laboratory evaluation of simple soil characteristics. Field practicals on soil formation in the Pretoria area.

    View more

  • Module content:

    Introduction to sedimentology; grain studies; composition and textures of sedimentary rocks; flow dynamics and behaviour of sediment particles in transport systems; description and genesis of sedimentary structures; diagenesis; depositional environments and their deposits, modern and ancient; chemical sedimentary rocks; economic sedimentology; field data acquisition from sedimentary rocks and writing of reports; sieve analysis; Markov analysis; analysis of palaeocurrent trends; interpretation of sedimentary profiles.

    View more

  • Module content:

    Integrated theoretical and practical course dealing with the principles of rock deformation and analysis of deformed rocks.  Stress, strain and rheology, joints, experimental rock deformation, fault systems and Anderson’s theory of faulting. Folds and interference folding, tectonic fabrics, shear zones, progressive deformation. Stereographic projection and structural analysis.

    View more

  • Module content:

    Classification and nomenclature of igneous rocks. The nature of silicate melts; physical and chemical factors influencing crystallisation and textures of igneous rocks. Phase diagrams, fractional crystallisation and partial melting. Trace elements and isotopes, and their use in petrogenetic studies. Global distribution of magmatism and its origin. Mid-oceanic ridges, active continental margins, intraplate magmatism.

    View more

  • Module content:

    Classification of metamorphic rocks. Anatexis, migmatite and granite; eclogite. Metamorphic textures. PT-time loops. Metamorphism in various plate tectonic environments.

    View more

  • Module content:

    Origin and classification of groundwater; classification of aquifers; groundwater movement; equations for groundwater flow into boreholes; the La Place equation and solutions for pump tests; execution and interpretation of pump tests. Groundwater flow modelling; classification of aquifers in southern Africa; groundwater exploration and management. Mapping techniques.

    View more

  • Module content:

    Stresses, strains and the mechanical properties of materials: Normal stress and shear stress, tension and compression, equilibrium in shear, factor of safety, design, shear strain, stress/strain diagram, Hooke’s Law, Poisson’s Ratio and the shear stress/strain diagram. Axial loads: Elastic deformation, displacements, statically determinate and indeterminate structures and thermal effects. Torsion: Torsion of circular bars and power transmission bending of straight members and composite beams. Transverse shear: Shear in straight members and shear flow. Combined loads: Thin walled pressure vessels and stresses as a result of combined loads. Stress transformation: Plane stress transformation, principle stresses, maximum values and stress variation in prismatic beams. Strain transformation: Plane strain transformation, principle strains, maximum values, strain gauges and rosettes and the relationship between E, G and ?. Design of beams from section characteristics. Deflection of beams: The elastic curve, integration method, Macaulay’s method and superposition.

    View more

  • Module content:

    Fundamental concepts in mineralogy, and practical applications of mineralogy, including: the basics of crystal structure; the crystallographic groups; the rules of atomic substitution; phase transitions and phase diagrams; the structure and uses of olivine, pyroxene, feldspar, amphibole, mica, aluminosilicates, garnet, cordierite, and more uncommon mineral groups such as oxides, sulphides and carbonates; the calculation of mineral formulae from chemical analyses using various methods. Practical sessions: the basics of optical mineralogy and the use of transmitted light microscopy for thin section examination of minerals and rocks; the practicals will develop mineral identification skills for the minerals covered in the lectures, and cover basic textural identification.

    View more

Elective modules

  • Module content:

    Theory: Classical chemical thermodynamics, gases, first and second law and applications, physical changes of pure materials and simple compounds. Phase rule: Chemical reactions, chemical kinetics, rates of reactions.

    View more

  • Module content:

    Theory: Statistical evaluation of data, gravimetric analysis, aqueous solution chemistry, chemical equilibrium, precipitation-, neutralisation- and complex formation titrations, redox titrations, potentiometric methods, introduction to electrochemistry.

    View more

  • Module content:

    Theory: Resonance, conjugation and aromaticity. Acidity and basicity. Introduction to 13C NMR spectroscopy. Electrophilic addition: alkenes. Nucleophilic substitution, elimination, addition: alkyl halides, alcohols, ethers, epoxides, carbonyl compounds: ketones, aldehydes, carboxylic acids and their derivatives.

    View more

  • Module content:

    Theory: Atomic structure, structure of solids (ionic model). Coordination chemistry of transition metals: Oxidation states of transition metals, ligands, stereochemistry, crystal field theory, consequences of d-orbital splitting, chemistry of the main group elements, electrochemical properties of transition metals in aqueous solution, industrial applications of transition metals. Introduction to IR spectroscopy.

    View more

  • Module content:

    Physical processes that influence the earth’s surface and management. Specific processes and their interaction in themes such as weathering; soil erosion; slope, mass movement and fluvial processes. Practical laboratory exercises are based on the themes covered in the module theory component.

    View more

  • Module content:

    *This module is for Architecture and Landscape Architecture students only.
    The theory component covers geomorphological aspects of the built environment including landscape identification; weathering or deterioration of natural stone and application to design and preservation of buildings and monuments; slope hydrology and stability conditions; soil erosion processes and construction impacts; drainage modification in urban areas; wetland identification, human impacts and rehabilitation; recreational impacts and management. In addition to the theory a field-based project is undertaken.

    View more

  • Module content:

    The nature of geographical data and measurement. Probability, probability distributions and densities, expected values and variances, Central Limit theorem. Sampling techniques. Exploratory data analysis, descriptive statistics, statistical estimation, hypothesis testing, correlation analysis and regression analysis.

    View more

  • Module content:

    *The content of this module is the same as GGY 283 and students are not allowed to earn credits for both GGY 283 and GIS 221.
    Introduction to Geographic Information Systems (GIS), theoretical concepts and applications of GIS. The focus will be on the GIS process of data input, data analysis, data output and associated technologies.

    View more

  • Module content:

    This module will provide a thorough introduction to the basic scientific principles involved in remote sensing, and some of the applications to studies of the Earth’s surface. This includes examining the basic physics of electromagnetic radiation and the complex interactions of radiation with the surface and atmosphere (i.e. spectral signatures). In addition, basic concepts of photogrammetry will be discussed. The theoretical background laid out in the first half of the module will provide the tools for examining various remote sensing applications using data obtained in different parts of the electromagnetic spectrum. The applications will include uses of satellite remote sensing data for mapping and monitoring vegetation, soils and minerals, snow and ice, water resources and quality, and urban landscapes. The laboratory section will include hands-on experience with various satellite image data sets.

    View more

  • Module content:

    Classical mechanics (28 lectures)
    Fundamental concepts, energy and angular momentum, calculus of variations and Lagrangian mechanics, conservative central forces and two body problems, scattering, mechanics in rotating reference frames, many body systems.
    Physical Optics (14 lectures)
    Maxwell’s equations, wave equation and plane wave solution, coherence, interference,
    diffraction, polarisation.
    Physics of Materials (14 lectures)
    Classification of materials. Atomic bonding. Crystallography. Defects. Material strength.
    Phase diagram's, Ceramics. Polymers. Composites. Fracture. Electrical and
    magnetic properties. Semiconductors. Smart materials Nanotechnology.
    Experiments (14 sessions)

    View more

  • Module content:

    Adjustment and use of following instruments: Plane table, level, compass and theodolite. Elementary site surveying and levelling, tachometry. Definition of survey. Co-ordinate systems and bearing. Connections and polars. Methods of determining points. Elevation. Tachometry.

    View more

  • Module content:

    Adjustment and use of following instruments: Plane table, level, compass and theodolite. Elementary site surveying and leveling, tachometry. Definition of survey. Co-ordinate systems and bearing. Connections and polars. Methods of determining points. Elevation. Tachometry.

    View more

  • Module content:

    General surveying; instruments, their handling and adjusting; surveying systems and simple calculations; determining of levels; setting out of the works; tacheometry and plotting; scales, planimetry; areas and volumes; construction surveying; aerial photography.

    View more

  • Module content:

    Conservative forces and conservation laws. Basic thermodynamic laws for dry and humid air. The equation of state. Adiabatic processes and temperature lapse rates. The Clausuis-Claperon equation. Calculation of the wet adiabat. 

    View more

  • Module content:

    This is an introduction to linear algebra on Rn. Matrices and linear equations, linear combinations and spans, linear independence, subspaces, basis and dimension, eigenvalues, eigenvectors, similarity and diagonalisation of matrices, linear transformations.

    View more

  • Module content:

    Calculus of multivariable functions, directional derivatives. Extrema and Lagrange multipliers. Multiple integrals, polar, cylindrical and spherical coordinates.

    View more

  • Module content:

    Properties of real numbers. Analysis of sequences and series of real numbers. Power series and theorems of convergence. The Bolzano-Weierstrass theorem. The intermediate value theorem and analysis of real-valued functions on an interval. The Riemann integral: Existence and properties of the interval.

    View more

  • Module content:

    Abstract vector spaces, change of basis, matrix representation of linear transformations, orthogonality, diagonalisability of symmetric matrices, some applications.

    View more

  • Module content:

    Theory and solution methods for linear differential equations as well as for systems of linear differential equations. Theory and solution methods for first order non-linear differential equations. The Laplace transform with application to differential equations. Application of differential equations to modelling problems.

    View more

  • Module content:

    Calculus of multivariable functions, directional derivatives. Extrema. Multiple integrals, polar, cylindrical and spherical coordinates. Line integrals and the theorem of Green. Surface integrals and the theorems of Gauss and Stokes.

    View more

  • Module content:

    Numerical integration. Numerical methods to approximate the solution of non-linear equations, systems of equations (linear and non-linear), differential equations and systems of differential equations. Direct methods to solve linear systems of equations.

    View more

  • Module content:

    Setting up and solving recurrence relations. Equivalence and partial order relations. Graphs: paths, cycles, trees, isomorphism. Graph algorithms: Kruskal, Prim, Fleury. Finite state automata.

    View more

  • Module content:

    *Students will not be credited for more than one of the modules for their degree: WTW 264, WTW 286
    Theory and solution methods for ordinary differential equations and initial value problems: separable and linear first-order equations, linear equations of higher order, systems of linear equations. Application to mathematical models.  Numerical methods applied to nonlinear systems.Qualitative analysis of linear systems.

    View more

  • Module content:

    Vibrating systems and waves (14 lectures)
    Simple harmonic motion (SHM). Superposition (different frequencies, equal frequencies). Perpendicular vibrations (Lissajous figures). Damped SHM. Forced oscillations. Resonance. Q-value. Transverse wave motion. Plane wave solution using method of separation of variables. Reflection and transmission at a boundary. Normal and eigenmodes. Wave packets. Group velocity.
    Modern physics (30 lectures)
    Special relativity: Galilean and Lorentz transformations. Postulates. Momentum and energy. 4 vectors and tensors. General relativity. Quantum physics. Failure of classical physics. Bohr model. Particle-wave duality. Schrödinger equation. Piece-wise constant potentials. Tunneling. X-rays. Laser. Nuclear physics: Fission. Fusion. Radioactivity.
    Heat and thermodynamics (12 lectures)
    Heat. First Law. Kinetic theory of gases. Mean free path. Ideal, Clausius, Van der Waals and virial gases. Entropy. Second Law. Engines and refrigerators. Third Law. Thermodynamic potentials: Enthalpy Helmholtz and Gibbs free energies, Chemical potential. Legendre transformations (Maxwell relations). Phase equilibrium. Gibbs phase rule.
    Modelling and simulation (7 practical sessions)
    Introduction to programming in a high level system: Concept of an algorithm and the basic logic of a computer programme. Symbolic manipulations, graphics, numerical computations. Applications: Selected illustrative examples.
    Error Analysis (7 practical sessions)
    Experimental uncertainties. Propagation of uncertainties. Statistical analysis of random uncertainties. Normal distribution. Rejection of data. Least-squares fitting. Covariance and correlation.

    View more

  • Module content:

    An urbanising world. Urban structure and land use. Urban processes. The urban environment. Social structure and change in cities. Living in the city. Economy, society and politics in the city. Third-world cities and South African cities. Urban futures.

    View more

  • Module content:

    The influence of biotic and abiotic factors on the productivity of different strata and components of natural and planted pastures. This will enable the student to understand the management, production, appropriate and optimal utilisation as well as the conservation of these pastures. These principles can be used to ensure sustainable animal production and health.

    View more

  • Module content:

    Vectors and geometry. Calculus of vector functions with applications to differential geometry, kinematics and dynamics. Vector analysis, including vector fields, line integrals of scalar and vector fields, conservative vector fields, surfaces and surface integrals, the Theorems of Green, Gauss and Stokes with applications.

    View more

  • Module content:

    Vector algebra, curl of a vector, total and partial derivatives, second law of motion. Spherical coordinates Acceleration in rotating co-ordinates, fundamental forces, momentum equation. Three dimensional flow balance, conservation of mass, heat equation, thermodynamic energy equation. Introduction to finite difference methods. Numerical estimation of the geostrophic wind, vorticity and divergence. Advection of temperature. Development of a two-dimensional temperature advection model.

    View more

  • Module content:

    *Students will not be credited for both WTW 162 and WTW 264 or both WTW 264 and WTW 286 for their degree.


    Theory and solution methods for ordinary differential equations and initial value problems: separable and linear first order equations, linear equations of higher order, systems of linear equations. Laplace transform.

    View more

Minimum credits: 144

Core modules

  • Module content:

    The more exact chemistry of soils systematically explained by understanding the particular chemical principles. Charge origin. Chemical equilibriums. Manifestations of sorption. Ion exchange. Acidic soils, saline soils and the organic fraction of soil. The chemistry of the important plant nutrient elements P, K and N is explained.

    View more

  • Module content:

    A taxonomic system for South Africa. USDA’s Soil Taxonomy. Land suitability evaluation. Optimal resource utilization. The conservation component. Ecological aspects. Ecotype, land types. Soil maps. Practical work: Field practicals and compulsory excursion. Identification of soil horizons, forms and families. Land suitability evaluation. Elementary mapping exercise.

    View more

  • Module content:

    Systematic review of major metallic and non-metallic ore types and examples in South Africa and world-wide; ore type models (grades, tonnages); geometry of ore bodies; mining. Ore samples and ore mineralogy. Mapping techniques.

    View more

  • Module content:

    Review of classical geostatistical methods; problem evaluation; descriptive statistics, normal-, lognormal, three parameter lognormal distributions; confidence intervals; t-test. Sampling; cut-off values; grid generation and trend surface analysis. Semivariogram; error estimation; Kriging (BLUE) techniques. Ore reserve calculations.

    View more

  • Module content:

    Definition and scope of engineering geology; engineering geological properties and problems of rocks and soils within different stratigraphic units and climatic regions in southern Africa.

    View more

  • Module content:

    Introduction to soil mechanics. Introduction to clay mineralogy. Mass, volume relationships and phases of soil. Groundwater flow and permeability. Effective stress principles. Suction pressures in saturated as well as partially saturated soil. The Mohr circle and stresses at a point. The Mohr-Coulomb strength theory and the stress-strain properties of soil. The Boussinesq theory. Consolidation theory and soil settlement.

    View more

  • Module content:

    Strength and failure modes of rock material and rock failure criteria. The characteristics of joints in rock. Joint line surveys and interpretation of data. Characteristics of a rock mass, rock mass classification and determination of strength. Slope stability in surface mines. Induced seismicity due to deep mining and rock bursts.

    View more

Elective modules

  • Module content:

    Theory: Molecular quantum mechanics. Introduction: Shortcomings of classical physics, dynamics of microscopic systems, quantum mechanical principles, translational, vibrational and rotational movement. Atomic structure and spectra: Atomic hydrogen, multiple electron systems, spectra of complex atoms, molecular structure, the hydrogen molecule ion, diatomic and polyatomic molecules, structure and properties of molecules. Molecules in motion: Viscosity, diffusion, mobility. Surface chemistry: Physisorption and chemisorption, adsorption isotherms, surface tension, heterogeneous catalytic rate reactions, capillarity.

    View more

  • Module content:

    Theory: Separation methods: Extraction, multiple extraction, chromatographic systems. Spectroscopy: Construction of instruments, atomic absorption and atomic emission spectrometry, surface analysis techniques. Mass spectrometry. Instrumental electrochemistry.

    View more

  • Module content:

    Theory: NMR spectroscopy: applications. Aromatic chemistry, Synthetic methodology in organic chemistry. Carbon-carbon bond formation: alkylation at nucleophilic carbon sites, aldol and related condensations, Wittig and related reactions, acylation of carbanions (Claisen condensation).

    View more

  • Module content:

    Theory: Structure and bonding in inorganic chemistry. Molecular orbital approach, diatomic and polyatomic molecules, three-centre bonds, metal-metal bonds, transition metal complexes, magnetic properties, electronic spectra, reactivity and reaction mechanisms, reaction types, acid-base concepts, non-aqueous solvents, special topics.

    View more

  • Module content:

    *Note: The module is available for BSc (Geography) and BSc (Environmental Sciences) students only. The theory content of this module is the same as GGY 363 and students are not allowed to earn credits for both GGY 361 and GGY 363.


    Interactions of geomorphic processes within the physical and built environments; themes such as geomorphology and environmental change, slope processes and the environment, geomorphic risks and hazards, soil erosion and conservation, geomorphology in environmental management, applied weathering. Practicals involve fieldwork including sampling and mapping and subsequent laboratory analysis.

    View more

  • Module content:

    *Note: The content of this module is the same as GGY 361 and students are not allowed to earn credits for both GGY 361 and GGY 363.
    Interactions of geomorphic processes within the physical and built environments; themes such as geomorphology and environmental change, slope processes and the environment, geomorphic risks and hazards, soil erosion and conservation, geomorphology in environmental management, applied weathering.

    View more

  • Module content:

    Advanced theory and practice of Geographic Information Systems; GIS applications; design and implementation of GIS applications.

    View more

  • Module content:

    Construction of Raster Geovisualisations, spatial model construction and use, multi-criteria decision analysis. Factor analysis: Principle component analysis. Geostatistics: Spatial dependence modelling, ordinary kriging. Markov chains and cellular Automata, combined models.

    View more

  • Module content:

    This module aims to provide students with a working knowledge and skills to learn methods and techniques for collecting, processing and analysing remotely sensed data. Throughout the module, emphasis will be placed on image processing, image analysis, image classification, remote sensing and applications of remote sensing in geographical analysis and environmental monitoring. The module is composed of lectures, readings, laboratory exercises and research tasks.

    View more

  • Module content:

    Spherical trigonometry. Geometrical Geodesy: Datum surfaces and coordinate systems in Geodesy, Calculations on the ellipsoid, Datum transformations. Map projections: Projection principles, distortion determination, construction of conformal, equivalent and equidistant projections, the Transverse Mercator projection and UTM projection of an ellipsoidal earth, projection transformations. Space Geodesy: Time systems, Celestial and observer coordinate systems, Global Navigation Satellite Systems (GNSS), Satellite orbits and orbital parameters, 3¬ D positioning.

    View more

  • Module content:

    Quantitative description and measurement of soil water content and potential as well as saturated and unsaturated hydraulic conductivity. Modelling water flow in soil (Darcy’s law, Richards's equation). Infiltration, redistribution, evaporation, runoff and percolation. Irrigation in South Africa. Modelling and managing the soil water balance. Plant water consumption and the soil-plant-atmosphere continuum. Irrigation scheduling (soil, plant and atmosphere approaches). Managing poor quality water. Irrigation systems. The module includes a field trip to an irrigation scheme.

    View more

  • Module content:

    Statistical mechanics (28 lectures)
    Isolated systems in thermodynamical equilibrium. Systems in equilibrium with a heat bath: the canonical ensemble, Gibbs' entropic formula, classical statistical mechanics, energy equipartition theorem, thermodynamic potentials, paramagnetism.
    The classical limit of perfect gases: non-distinguishable character of quantum particles, the equation of state of the classical ideal gas. Quantum perfect gases: Black body radiation, the grand canonical ensemble, Fermi-Dirac distribution, the free electron gas in metals, the Bose-Einstein distribution, Bose-Einstein condensation.
    Solid state physics (28 lectures)
    Crystal structures, the reciprocal lattice, x-ray diffraction, lattice vibration, the Debye model, characteristics of solids, the free electron model, Pauli paramagnetism, electronic heat capacity, the relaxation time, electrical conduction, the classical Hall effect, thermal conduction in metals, failures of the free electron model, the independent electron model, band theory of solids.
    Computational Physics and modelling. Assessment will be done through a portfolio of project reports. The topics for the projects will be selected from various sub-disciplines of Physics.

    View more

  • Module content:

    The influence of biotic and abiotic factors on the productivity of different strata and components of natural pastures. This will enable the student to advise users, with the necessary motivation, on the appropriate use of these strata and components and will form a basis for further research on this system. The principles of veld management s and the influence of management practices on sustainable animal production from natural pastures. This will enable the student to advise users on veld management and veld management principles. It will also form a basis for further research on veld management.

    View more

  • Module content:

    The establishment and use of planted pastures species and fodder crops and the
    conservation of fodder. This will enable students to advise users on establishment and utilization of planted pastures species as well as farmers on the production,
    conservation and optimum use of fodder. This will also form a basis for further research on planted pastures.

    View more

  • Module content:

    Scale analyses and simplification of the basic equations. The geostrophic, thermal and gradient wind. The vorticity equation and divergence.

    View more

  • Module content:

    Tendency and Omega equations. Model of a boroclinic system. Introduction to numerical models. Application in meteorological display and analysis software.

    View more

  • Module content:

    Multivariate statistical distributions: Moments of a distribution, moment generating functions, independence. Multivariate normal distribution: Conditional distributions, partial and multiple correlations. Multinomial and multivariate Poisson distributions: Asymptotic normality and estimation of parameters. Distribution of quadratic forms in normal variables. Multivariate normal samples: Estimation of the mean vector and covariance matrix, estimation of correlation coefficients, distribution of the sample mean, sample covariance matrix and sample correlation coefficients. The linear model: Models of full rank, least squares estimators, test of hypotheses. Practical applications: Practical statistical modelling and analysis using statistical computer packages and interpretation of the output.

    View more

  • Module content:

    Definition of a stochastic process. Stationarity. Covariance stationary. Markov property. Random walk. Brownian motion. Markov chains. Chapman-Kolmogorov equations. Recurrent and transient states. First passage time. Occupation times. Markov jump processes. Poisson process. Birth and death processes. Structures of processes. Structure of the time-homogeneous Markov jump process. Applications in insurance. Practical statistical modelling, analysis and simulation using statistical computer packages and the interpretation of the output.

    View more

  • Module content:

    Stationary and non-stationary univariate time-series. Properties of autoregressive moving average (ARMA) and autoregressive integrated moving average (ARIMA) processes. Identification, estimation and diagnostic testing of a time-series model. Forecasting. Multivariate time-series. Practical statistical modelling and analysis using statistical computer packages.

    View more

  • Module content:

    Decision theory. Loss distributions. Reinsurance. Risk models. Ruin theory. Credibility theory. Methods to forecast future claim numbers and amounts. The generalised linear model: Exponential family, mean and variance, link functions, deviance and residual analysis, test statistics, log-linear and logit models. Practical statistical modelling and analysis using statistical computer packages.

    View more

  • Module content:

    Topology of finite dimensional spaces: Open and closed sets, compactness, connectedness and completeness. Theorems of Bolzano-Weierstrass and Heine-Borel. Properties of continuous functions and applications. Integration theory for functions of one real variable. Sequences of functions.

    View more

  • Module content:

    Series of functions, power series and Taylor series. Complex functions, Cauchy- Riemann equations, Cauchy's theorem and integral formulas. Laurent series, residue theorem and calculation of real integrals using residues.

    View more

  • Module content:

    Mean variance portfolio theory. Market equilibrium models such as the capital asset pricing model. Factor models and arbitrage pricing theory. Measures of investment risk. Efficient market hypothesis. Stochastic models of security prices

    View more

  • Module content:

    Discrete time financial models: Arbitrage and hedging; the binomial model. Continuous time financial models: The Black-Scholes formula; pricing of options and the other derivatives; interest rate models; numerical procedures.

    View more

  • Module content:

    Group theory: Definition, examples, elementary properties, subgroups, permutation groups, isomorphism, order, cyclic groups, homomorphisms, factor groups. Ring theory: Definition, examples, elementary properties, ideals, homomorphisms, factor rings, polynomial rings, factorisation of polynomials. Field extensions, applications to straight-edge and compass constructions.

    View more

  • Module content:

    Matrix exponential function: homogeneous and non-homogeneous linear systems of differential equations. Qualitative analysis of systems: phase portraits, stability, linearisation, energy method and Liapunov's method. Introduction to chaotic systems. Application to real life problems.

    View more

  • Module content:

    Direct methods for the numerical solution of systems of linear equations, pivoting strategies. Iterative methods for solving systems of linear equations and eigenvalue problems. Iterative methods for solving systems of nonlinear equations. Introduction to optimization. Algorithms for the considered numerical methods are derived and implemented in computer programmes. Complexity of computation is investigated. Error estimates and convergence results are proved.

    View more

  • Module content:

    Conservation laws and modelling. Fourier analysis. Heat equation, wave equation and Laplace's equation. Solution methods including Fourier series. Energy and other qualitative methods.

    View more

  • Module content:

    Kinematics of a continuum: Configurations, spatial and material description of motion. Conservation laws. Analysis of stress, strain and rate of deformation. Linear constitutive equations. Applications: Vibration of beams, equilibrium problems in elasticity and special cases of fluid motion.

    View more

  • Module content:

    Axiomatic development of neutral, Euclidean and hyperbolic geometry. Using models of geometries to show that the parallel postulate is independent of the other postulates of Euclid.

    View more

  • Module content:

    Electronics (14 lectures)
    Thévenin and Norton equivalent circuits, superposition principle, RC, LC and LRC circuits. Semiconductor diode. Bipolar transistor. Operational amplifiers. Computer controlled instrumentation.
    Electromagnetism (21 lectures)
    Electrostatics: Coulomb’s law, divergence and curl of E, Gauss’ law, Laplace’s equation, image charge problems, multipole expansion.
    Magnetostatics: Lorenz force, Biot-Savart law, divergence and curl of magnetic field strength, Ampère’s law, magnetic vector potential, multipole expansion, boundary conditions.
    Electrodynamics: Electromotive force, electromagnetic induction, Maxwell’s equations, wave equation.
    Electric and magnetic fields in matter: Polarisation, electric displacement and Gauss’s law in dielectrics, linear dielectrics. Magnetisation (diamagnets, paramagnets, ferromagnets), auxiliary field H and Ampère’s law in magnetised materials, linear and nonlinear media.
    Quantum mechanics (28 lectures)
    The Schrödinger equation, the statistical interpretation of the wave function, momentum, the uncertainty principle, the time-independent Schrödinger equation, stationary states, the infinite square well potential, the harmonic oscillator, the free particle, the Delta-Function potential, the finite square well potential, Hilbert spaces, observables, eigen functions of a Hermitian operator, Dirac notation, the Schrödinger equation in spherical coordinates, the hydrogen atom, angular momentum spin.

    View more

  • Module content:

    The module conceptually integrates environmental, economic, and social components of sustainable development. Other topics covered include changing perceptions on development and environment, development paradigms, challenges of sustainable development, actors and actions in sustainable development, rural and urban livelihoods, and a Third World assessment of sustainable development in the developing world.

    View more

  • Module content:

    Classic development frameworks. Spatial development history and legacy in South Africa. Overview of contemporary environmental legislation in South Africa. Rural development strategy. Rural and agricultural reconstruction. Land reform. Urban development and strategy. Urban spatial reconstruction. National spatial development frameworks.

    View more

  • Module content:

    The module focuses on contemporary environmental issues in southern Africa. Recent and future impacts of human pressures on natural resources, the state of the environment in South Africa, management of critical resources, population trends, biodiversity loss, pollution, water scarcity, desertification, climate change, waste accumulation and management, environmental management tools, environmental education and environmental management legislation.

    View more

  • Module content:

    Meterological observations data codes. Weather applications software and computing environments of meteorological analysis and weather forecasting techniques. Applications of remote sensing in weather forecasting. Aaerological diagrams. Applications of numerical weather prediction, and types of weather forecasts. Integration of information to describe the current state of the atmosphere and to predict a future state of the atmosphere.

    View more


The information published here is subject to change and may be amended after the publication of this information. The General Regulations (G Regulations) apply to all faculties of the University of Pretoria. It is expected of students to familiarise themselves well with these regulations as well as with the information contained in the General Rules section. Ignorance concerning these regulations and rules will not be accepted as an excuse for any transgression.

Copyright © University of Pretoria 2024. All rights reserved.

FAQ's Email Us Virtual Campus Share Cookie Preferences