Yearbooks

Programme: BSc (Engineering and Environmental Geology)

Kindly take note of the disclaimer regarding qualifications and degree names.
Code Faculty Department
02133043 Faculty of Natural and Agricultural Sciences Department: Geology
Credits Duration NQF level
Minimum duration of study: 3 years Total credits: 420 NQF level:  07

Admission requirements

Important information for all prospective students for 2022

  • The admission requirements apply to students who apply for admission to the University of Pretoria with a National Senior Certificate (NSC) and Independent Examination Board (IEB) qualifications.
  • Applicants with qualifications other than the abovementioned should refer to:
    • Brochure: Undergraduate Programme Information 2022: Qualifications other than the NSC and IEB, available at click here.
  • Citizens from countries other than South Africa (applicants who are not South African citizens) should also refer to:
  • School of Tomorrow (SOT), Accelerated Christian Education (ACE) and General Education Development Test (GED): The University of Pretoria no longer accepts qualifications awarded by these institutions.
  • National Certificate (Vocational) (NCV) Level 4: The University of Pretoria may consider NCV candidates, provided they meet the exemption for bachelor’s status criteria and the programme requirements.

Transferring students

A transferring student is a student who, at the time of application for a degree programme at the University of Pretoria (UP) –

  • is a registered student at another tertiary institution, or was previously registered at another tertiary institution and did not complete the programme enrolled for at that institution, and is not currently enrolled at a tertiary institution, or has completed studies at another tertiary institution, but is not currently enrolled at a tertiary institution, or has started with tertiary studies at UP, then moved to another tertiary institution and wants to be readmitted at UP.

A transferring student will be considered for admission based on

  • an NSC or equivalent qualification with exemption to bachelor’s or diploma studies (whichever is applicable); and meeting the minimum faculty-specific subject requirements at NSC or tertiary level; or having completed a higher certificate at a tertiary institution with faculty-specific subjects/modules passed (equal to or more than 50%), as well as complying with faculty rules on admission;
  • previous academic performance (must have passed all modules registered for up to the closing date of application ) or as per faculty regulation/promotion requirements;
  • a certificate of good conduct.

Note: Students who have been dismissed at the previous institution due to poor academic performance, will not be considered for admission to UP.

Returning students

A returning student is a student who, at the time of application for a degree programme –

  • is a registered student at UP, and wants to transfer to another degree at UP, or was previously registered at UP and did not complete the programme enrolled for, and did not enrol at another tertiary institution in the meantime (including students who applied for leave of absence), or has completed studies at UP, but is not currently enrolled or was not enrolled at another tertiary institution after graduation.

A returning student will be considered for admission based on

  • an NSC or equivalent qualification with exemption to bachelor’s or diploma studies (whichever is applicable); and meeting the minimum faculty-specific subject requirements at NSC or tertiary level; or previous academic performance (should have a cumulative weighted average of at least 50% for the programme enrolled for);
  • having applied for and was granted leave of absence.

Note: Students who have been excluded/dismissed from a faculty due to poor academic performance may be considered for admission to another programme at UP.  The Admissions Committee may consider such students if they were not dismissed more than twice. Only ONE transfer between UP faculties will be allowed, and a maximum of two (2) transfers within a faculty.

Important faculty-specific information on undergraduate programmes for 2022

  • The closing date is an administrative admission guideline for non-selection programmes. Once a non-selection programme is full  and has reached the institutional targets, then that programme will be closed for further admissions, irrespective of the closing date. However, if the institutional targets have not been met by the closing date, then that programme will remain open for admissions until the institutional targets are met.
  • The following persons will be considered for admission: Candidates who have a certificate that is deemed by the University to be equivalent to the required National Senior Certificate (NSC) with university endorsement; candidates who are graduates from another tertiary institution or have been granted the status of a graduate of such an institution, and candidates who are graduates of another faculty at the University of Pretoria.
  • Life Orientation is excluded when calculating the Admission Point Score (APS).
  • Grade 11 results are used for the conditional admission of prospective students. Final admission is based on the final NSC/IEB results.

University of Pretoria website: click here

Minimum requirements

Achievement level

English Home Language or English First Additional Language

Mathematics

Physical Sciences

APS

NSC/IEB

NSC/IEB

NSC/IEB

5

5

5

34

Candidates who do not comply with the minimum admission requirements for BSc (Engineering and Environmental Geology), may be considered for admission to the BSc – Extended programme – Physical Sciences, which requires an additional year of study.

BSc – Extended Programme – Physical Sciences

Minimum requirements

Achievement level

English Home Language or English First Additional Language

Mathematics

Physical Sciences

APS

NSC/IEB

NSC/IEB

NSC/IEB

4

4

4

28

Note:

*The BSc – Extended programmes are not available for students who meet all the requirements for the corresponding mainstream programme.

*Please note that only students who apply in their final NSC or equivalent qualification year will be considered for admission into any of the BSc – Extended programmes.

 

Other programme-specific information

1.1    Requirements for specific modules
A candidate who:

  1. does not qualify for STK 110, must enrol for STK 113 and STK 123;
  2.  egisters for Mathematical Statistics (WST) and Statistics (STK) modules must take note that WST and STK modules, except for STK 281, may not be taken simultaneously in a programme; a student must take one and only one of the following options:
  • WST 111, WST 121, WST 212, WST 211, WST 221, WST 311, WST 312, WST 322, WST 321, and STK 353

or

  • WST 111, WST 121, WST 212, WST 211, WST 221, WST 311, WST 312, WST 322, STK320, STK353.

or

  • STK 110, STC 122, STK 210, STK 220, WST 212, STK 310, STK 320, STK 353.
  1. registers for a module presented by another faculty must take note of the timetable clashes, prerequisites for that module, subminimum required in examination papers, supplementary examinations, etc.

1.2    Fundamental modules

  1. It is compulsory for all new first-year students to satisfactorily complete the Academic orientation (UPO 102) and to take Academic information management modules (AIM 111 and AIM 121) and Language and study skills (LST 110). Please see curricula for details.
  2. Students who intend to apply for admission to MBChB or BChD in the second semester, when places become available in those programmes, may be permitted to register for up to 80 module credits and 4 core modules in the first semester during the first year provided that they obtained a final mark of no less than 70% for Grade 12 Mathematics and achieved an APS of 34 or more in the NSC.

Promotion to next study year

A student will be promoted to the following year of study if he or she passed 100 credits of the prescribed credits for a year of study, unless the Dean on the recommendation of the relevant head of department decides otherwise. A student who does not comply with the requirements for promotion to the following year of study, retains the credit for the modules already passed and may be admitted by the Dean, on recommendation of the relevant head of department, to modules of the following year of study to a maximum of 48 credits, provided that it will fit in with both the lecture and examination timetable.

General promotion requirements in the faculty
All students whose academic progress is not acceptable can be suspended from further studies.

  • A student who is excluded from further studies in terms of the stipulations of the abovementioned regulations, will be notified in writing by the Dean or Admissions Committee at the end of the relevant semester.
  • A student who has been excluded from further studies may apply in writing to the Admissions Committee of the Faculty of Natural and Agricultural Sciences for re-admission.
  • Should the student be re-admitted by the Admissions Committee, strict conditions will be set which the student must comply with in order to proceed with his/her studies.
  • Should the student not be re-admitted to further studies by the Admissions Committee, he/she will be informed in writing.
  • Students who are not re-admitted by the Admissions Committee have the right to appeal to the Senate Appeals Committee.
  • Any decision taken by the Senate Appeals Committee is final.

Minimum credits: 126

Fundamental =   14
Core             =   128

Fundamental modules

Core modules

  • Module content:

    General introduction to inorganic, analytical and physical chemistry. Atomic structure and periodicity. Molecular structure and chemical bonding using the VSEOR model. Nomenclature of inorganic ions and compounds. Classification of reactions: precipitation, acid-base, redox reactions and gas-forming reactions. Mole concept and stoichiometric calculations concerning chemical formulas and chemical reactions. Principles of reactivity: energy and chemical reactions. Physical behaviour gases, liquids, solids and solutions and the role of intermolecular forces. Rate of reactions: Introduction to chemical kinetics.

    View more

  • Module content:

    Theory: General physical-analytical chemistry: Chemical equilibrium, acids and bases, buffers, solubility equilibrium, entropy and free energy, electrochemistry. Organic chemistry: Structure (bonding), nomenclature, isomerism, introductory stereochemistry, introduction to chemical reactions and chemical properties of organic compounds and biological compounds, i.e. carbohydrates and aminoacids. Practical: Molecular structure (model building), synthesis and properties of simple organic compounds.

    View more

  • Module content:

    Solar system; structure of solid matter; minerals and rocks; introduction to symmetry and crystallography; important minerals and solid solutions; rock cycle; classification of rocks. External geological processes (gravity, water, wind, sea, ice) and their products (including geomorphology). Internal structure of the earth. The dynamic earth – volcanism, earthquakes, mountain building – the theory of plate tectonics. Geological processes (magmatism, metamorphism, sedimentology, structural geology) in a plate tectonic context. Geological maps and mineral and rock specimens. Interaction between man and the environment, and nature of anthropogenic climate change.

    View more

  • Module content:

    This module will give an overview of earth history, from the Archaean to the present. Important concepts such as the principles of stratigraphy and stratigraphic nomenclature, geological dating and international and South African time scales will be introduced. A brief introduction to the principles of palaeontology will be given, along with short descriptions of major fossil groups, fossil forms, ecology and geological meaning. In the South African context, the major stratigraphic units, intrusions and tectonic/metamorphic events will be detailed, along with related rock types, fossil contents, genesis and economic commodities. Anthropogenic effects on the environment and their mitigation. Practical work will focus on the interpretation of geological maps and profiles.

    View more

  • Module content:

    SI-units. Significant figures. Waves: intensity, superposition, interference, standing waves, resonance, beats, Doppler. Geometrical optics: Reflection, refraction, mirrors, thin lenses, instruments. Physical optics: Young-interference, coherence, diffraction, polarisation. Hydrostatics and dynamics: density, pressure, Archimedes’ principle, continuity, Bernoulli. Heat: temperature, specific heat, expansion, heat transfer. Vectors. Kinematics of a point: Relative, projectile, and circular motion. Dynamics: Newton’s laws, friction. Work: point masses, gasses (ideal gas law), gravitation, spring, power. Kinetic energy: Conservative forces, gravitation, spring. Conservation of energy. Conservation of momentum. Impulse and collisions. System of particles: Centre of mass, Newton’s laws. Rotation: torque, conservation of angular momentum, equilibrium, centre of gravity.

    View more

  • Module content:

    Equivalent force systems, resultants. Newton's laws, units. Forces acting on particles. Rigid bodies: principle of transmissibility, resultant of parallel forces. Vector moments and scalar moments. Relationship between scalar- and vector moments. Couples. Equivalent force systems on rigid bodies. Resultants of forces on rigid bodies. Equilibrium in two and three dimensions. Hooke's law. Trusses and frameworks. Centroids and second moments of area. Beams: distributed forces, shear force, bending moment, method of sections, relationship between load, shear force and bending moment.

    View more

  • Module content:

    *This module serves as preparation for students majoring in Mathematics (including all students who intend to enrol for WTW 218 and WTW 220). Students will not be credited for more than one of the following modules for their degree: WTW 114, WTW 158, WTW 134, WTW 165.
    Functions, limits and continuity. Differential calculus of single variable functions, rate of change, graph sketching, applications. The mean value theorem, the rule of L'Hospital. Definite and indefinite integrals, evaluating definite integrals using anti-derivatives, the substitution rule.

    View more

  • Module content:

    *Students will not be credited for more than one of the following modules for their degree:
    WTW 124, WTW 146, WTW 148 and WTW 164. This module serves as preparation for students majoring in Mathematics (including all students who intend to enrol for WTW 218, WTW 211 and WTW 220).

    The vector space Rn, vector algebra with applications to lines and planes, matrix algebra, systems of linear equations, determinants. Complex numbers and factorisation of polynomials. Integration techniques and applications of integration. The formal definition of a limit. The fundamental theorem of Calculus and applications. Vector functions and quadratic curves. 

    View more

Minimum credits: 142

Core             =   94
Elective         =   48

Additional information:
Students who do not intend to continue with Mathematics on third year level may replace WTW 220 with WTW 224
A block of 48 elective credits must be selected from the following-

  • Chemistry: CMY 282, CMY 283, CMY 284, CMY 285 (48 credits)
  • Mathematics: WTW 211, WTW 218, WTW 220, WTW 221 (48 credits)
  • Applied Mathematics: WTW 211, WTW 218, WTW 248, WTW 264 (48 credits)
  • GIS/Geomorphology: GGY 252, GIS 220, GGY 201 (36 credits)

Core modules

  • Module content:

    Note: Enrolment is limited. Preference will be given based on choice of majors. Students should enquire at the department if they wish to register for the module, but are unable to do so.
    *GIS 221 does not lead to admission to any module at 300 level.
    Introduction to Geographic Information Systems (GIS), theoretical concepts and applications of GIS. The focus will be on the GIS process of data input, data analysis, data output and associated technologies.This module teaches students to use GIS as a tool. Examples used throughout the course are drawn from South African case studies.

    View more

  • Module content:

    Origin and development of soil, weathering and soil formation processes. Profile differentiation and morphology. Physical characteristics: texture, structure, soil water, atmosphere and temperature. Chemical characteristics: clay minerals, ion exchange, pH, buffer action, soil acidification and salinisation of soil. Soil fertility and fertilisation. Soil classification. Practical work: Laboratory evaluation of simple soil characteristics. Field practicals on soil formation in the Pretoria area.

    View more

  • Module content:

    Introduction to sedimentology; grain studies; composition and textures of sedimentary rocks; flow dynamics and behaviour of sediment particles in transport systems; description and genesis of sedimentary structures; diagenesis; depositional environments and their deposits, modern and ancient; chemical sedimentary rocks; economic sedimentology; field data acquisition from sedimentary rocks and writing of reports; sieve analysis; Markov analysis; analysis of palaeocurrent trends; interpretation of sedimentary profiles.

    View more

  • Module content:

    Fundamental concepts in mineralogy, and practical applications of mineralogy, including: the basics of crystal structure; the crystallographic groups; the rules of atomic substitution; phase transitions and phase diagrams; the structure and uses of olivine, pyroxene, feldspar, amphibole, mica, aluminosilicates, garnet, cordierite, and more uncommon mineral groups such as oxides, sulphides and carbonates; the calculation of mineral formulae from chemical analyses using various methods. Practical sessions: the basics of optical mineralogy and the use of transmitted light microscopy for thin section examination of minerals and rocks; the practicals will develop mineral identification skills for the minerals covered in the lectures, and cover basic textural identification.

    View more

  • Module content:

    Classification and nomenclature of igneous rocks. The nature of silicate melts; physical and chemical factors influencing crystallisation and textures of igneous rocks. Phase diagrams, fractional crystallisation and partial melting. Trace elements and isotopes, and their use in petrogenetic studies. Global distribution of magmatism and its origin. Mid-oceanic ridges, active continental margins, intraplate magmatism. Classification of metamorphic rocks. Anatexis, migmatite and granite; eclogite. Metamorphic textures. PT-time loops. Metamorphism in various plate tectonic environments.

    View more

  • Module content:

    Introduction to field mapping techniques.

    View more

  • Module content:

    Concept of Stress: Stresses in structural members, stress on oblique plane and stress under general loading, components of stress, design considerations. Stress and Strain: statically indeterminate problems, thermal effects, Poisson’s ratio, generalised Hookes Law, shearing strain, stress-strain relationships. Torsion: Torsion of circular bars, stresses and strains in pure shear, power transmission, and statically indeterminate torsional members. Pure Bending: symmetric members in pure bending, stresses and deformations, deformations in transverse cross-sections, members made of composite materials, eccentric axial loading. Analysis and Design of Beams for Bending: shear and bending moment diagrams, relationships between load, shear and bending moments, design of prismatic beams for bending. Shearing stresses in Beams and Thin-Walled Members: Horizontal shearing stresses in beams, shearing stresses in Thin-Walled members. Transformation of Stress and Strain: Plane stress transformation, Mohr’s circle, principal stresses, maximum values and stress variation in prismatic beams; Plane strain transformation, Mohr’s circle, principal strains, maximum values, general state of stress, stresses in Thin-Walled pressure vessels. Principal Stresses under a given Loading: Principal stresses in beams, design of transmission shafts, stresses under combined loads. Deflection of Beams: Deformation under transverse loading, statically indeterminate beams, method of superposition. Energy Methods: Strain energy, elastic strain energy, strain energy for a general state of stress.
     

    View more

Elective modules

  • Module content:

    Theory: Classical chemical thermodynamics, gases, first and second law and applications, physical changes of pure materials and simple compounds. Phase rule: Chemical reactions, chemical kinetics, rates of reactions.

    View more

  • Module content:

    Statistical evaluation of data in line with ethical practice, gravimetric analysis, aqueous solution chemistry, chemical equilibrium, precipitation-, neutralisation- and complex formation titrations, redox titrations, potentiometric methods, introduction to electrochemistry. Examples throughout the course demonstrate the relevance of the theory to meeting the sustainable development goals of clean water and clean, affordable energy. 

    View more

  • Module content:

    Resonance, conjugation and aromaticity. Acidity and basicity. Introduction to 13C NMR spectroscopy. Electrophilic addition: alkenes. Nucleophilic substitution, elimination, addition: alkyl halides, alcohols, ethers, epoxides, carbonyl compounds: ketones, aldehydes, carboxylic acids and their derivatives Training in an ethical approach to safety that protects self, others and the environment is integral to the practical component of the course.

    View more

  • Module content:

    Atomic structure, structure of solids (ionic model). Coordination chemistry of transition metals: Oxidation states of transition metals, ligands, stereochemistry, crystal field theory, consequences of d-orbital splitting, chemistry of the main group elements, electrochemical properties of transition metals in aqueous solution, industrial applications of transition metals. Fundamentals of spectroscopy and introduction to IR spectroscopy. During practical training students learn to acquire and report data ethically. Practical training also deals with the misuse of chemicals and appropriate waste disposal to protect the environment and meet the UN sustainable development goals.

    View more

  • Module content:

    The module introduces students to urban settlement patterns, processes and structures. Using a series of case studies, it aims to develop an understanding of the challenges facing urban areas both in South Africa and globally.

    View more

  • Module content:

    Physical processes that influence the earth’s surface and management. Specific processes and their interaction in themes such as weathering; soil erosion; slope, mass movement and periglacial processes. Practical laboratory exercises and assignments are based on the themes covered in the module theory component.

    View more

  • Module content:

    The nature of geographical data and measurement.Application of statistics in the geographical domain. Probability, probability distributions and densities, expected values and variances, Central Limit theorem. Sampling techniques. Exploratory data analysis, descriptive statistics, statistical estimation, hypothesis testing, correlation analysis and regression analysis. Examples used throughout the course are drawn from South African and African case studies and taught within the framework of the UN Sustainable Development Goals.

    View more

  • Module content:

    This is an introduction to linear algebra on Rn. Matrices and linear equations, linear combinations and spans, linear independence, subspaces, basis and dimension, eigenvalues, eigenvectors, similarity and diagonalisation of matrices, linear transformations.

    View more

  • Module content:

    Calculus of multivariable functions, directional derivatives. Extrema and Lagrange multipliers. Multiple integrals, polar, cylindrical and spherical coordinates.

    View more

  • Module content:

    *This module is recommended as an elective only for students who intend to enrol for WTW 310 and/or WTW 320. Students will not be credited for more than one of the following modules for their degree: WTW 220 and WTW 224.

    Properties of real numbers. Analysis of sequences and series of real numbers. Power series and theorems of convergence. The Bolzano-Weierstrass theorem. The intermediate value theorem and analysis of real-valued functions on an interval. The Riemann integral: Existence and properties of the interval.

    View more

  • Module content:

    Abstract vector spaces, change of basis, matrix representation of linear transformations, orthogonality, diagonalisability of symmetric matrices, some applications.

    View more

  • Module content:

    *This module does not lead to admission to WTW 310 or WTW 320. Students will not be credited for more than one of the following modules for their degree: WTW 220 and WTW 224.
    Sequences of real numbers: convergence and monotone sequences. Series of real numbers: convergence, integral test, comparison tests, alternating series, absolute convergence, ratio and root tests. Power series: representation of functions as power series, Taylor and Maclaurin series. Application to series solutions of differential equations. 

    View more

  • Module content:

    Vectors and geometry. Calculus of vector functions with applications to differential geometry, kinematics and dynamics. Vector analysis, including vector fields, line integrals of scalar and vector fields, conservative vector fields, surfaces and surface integrals, the Theorems of Green, Gauss and Stokes with applications.

    View more

  • Module content:

    *Students will not be credited for both WTW 162 and WTW 264 or both WTW 264 and WTW 286 for their degree.


    Theory and solution methods for ordinary differential equations and initial value problems: separable and linear first order equations, linear equations of higher order, systems of linear equations. Laplace transform.

    View more

Minimum credits: 138

Core             =   122 
Elective         =    16

Additional information:
Either GLY 367 (24 credits) or SGM 323 (16 credits) must be taken in the second semester.

Core modules

  • Module content:

    The more exact chemistry of soils systematically explained by understanding the particular chemical principles. Charge origin. Chemical equilibriums. Manifestations of sorption. Ion exchange. Acidic soils, saline soils and the organic fraction of soil. The chemistry of the important plant nutrient elements P, K and N is explained.

    View more

  • Module content:

    A taxonomic system for South Africa. USDA’s Soil Taxonomy. Land suitability evaluation. Optimal resource utilization. The conservation component. Ecological aspects. Ecotype, land types. Soil maps. Practical work: Field practicals and compulsory excursion. Identification of soil horizons, forms and families. Land suitability evaluation. Elementary mapping exercise.

    View more

  • Module content:

    Integrated theoretical and practical course dealing with the principles of rock deformation and analysis of deformed rocks. Stress, strain and rheology, joints, experimental rock deformation, fault systems and Anderson's theory of faulting. Folds and interference folding, tectonic fabrics, shear zone, progressive deformation. Stereographic projection and structural analysis.

    View more

  • Module content:

    The hydrological cycle, water resources and water usage; porosity and permeability, heterogeneity and isotropy; the occurrence of groundwater, vadose and phreatic zones; aquifer types, relations and groundwater flow; hydrostratigraphy, surface water and groundwater interaction, springs; water balance, water flow, recharge and baseflow; Darcy’s Law, hydraulic conductivity and subsurface flow; capillarity, hydraulics, Bernoulli’s equation and the continuity principle; hydraulic parameters and their derivation from aquifer pumping tests, including Theis, Cooper-Jacob and other modifications; water quality, solubility, natural waters, ionic balance and plotting water chemistry data; groundwater mining, aquifer compaction and subsidence; saline intrusion, dryland salinity, pollution, NAPLs; site remediation and toxicology.

    View more

  • Module content:

    Advanced field mapping techniques.

    View more

  • Module content:

    Definition and scope of engineering geology; engineering geological properties and problems of rocks and soils within different stratigraphic units and climatic regions in southern Africa. Strength and failure modes of rock material and rock failure criteria. The characteristics of joints in rock. Joint line surveys and interpretation of data. Characteristics of a rock mass, rock mass classification and determination of strength. Slope stability in surface mines. Induced seismicity due to deep mining and rock bursts. This is in support of United Nationals Sustainable Development Goals dealing with clean water, sanitation, infrastructure development.

    View more

  • Module content:

    Introduction to soil mechanics. Introduction to clay mineralogy. Mass, volume relationships and phases of soil. Groundwater flow and permeability. Effective stress principles. Suction pressures in saturated as well as partially saturated soil. The Mohr circle and stresses at a point. The Mohr-Coulomb strength theory and the stress-strain properties of soil. The Boussinesq theory. Consolidation theory and soil settlement.

    View more

Elective modules

  • Module content:

    This module details the genesis and exploitation of major ore deposits, with an emphasis on South African examples. The processes through which ore deposits are formed and modified will be discussed, highlighting the relevance of sedimentary, metamorphic and igneous processes in the genesis of world-class ore bodies. The module will also address the methods of mining commonly used, and the international commodity market, including a brief introduction to ore reserve estimation and the evaluation of potential ore deposits. The section of the module involving mineral exploration and mining will emphasize the need of pursuing a sustainable mineral resources development mindset, by addressing and sharing ideas on the impact that mining has on environmental, social and economic issues including community welfare, impact of mining on land use, and rehabilitation post mining.

    View more

  • Module content:

    Application of consolidation theory. Bearing capacity of soil and foundation design, Terzaghi and general methods. Horizontal stresses in soil and design of retaining structures, Rankine and Couloumb’s methods. Slope stability including Bishop’s method of slices. Introduction to site investigation.

    View more


The regulations and rules for the degrees published here are subject to change and may be amended after the publication of this information.

The General Academic Regulations (G Regulations) and General Student Rules apply to all faculties and registered students of the University, as well as all prospective students who have accepted an offer of a place at the University of Pretoria. On registering for a programme, the student bears the responsibility of ensuring that they familiarise themselves with the General Academic Regulations applicable to their registration, as well as the relevant faculty-specific and programme-specific regulations and information as stipulated in the relevant yearbook. Ignorance concerning these regulations will not be accepted as an excuse for any transgression, or basis for an exception to any of the aforementioned regulations.

Copyright © University of Pretoria 2024. All rights reserved.

FAQ's Email Us Virtual Campus Share Cookie Preferences