Code | Faculty |
---|---|
12136021 | Faculty of Engineering, Built Environment and Information Technology |
Credits | Duration |
---|---|
Duration of study: 5 years | Total credits: 610 |
Please note: The Engineering Augmented Degree Programme (ENGAGE) is an extended degree programme with a five-year curriculum. It is designed to enable students who show academic potential but who do not meet the normal entry requirements for the four-year degree programme, to obtain an Engineering degree. ENGAGE students spend the first three years of the programme covering the content of the first two years of the four-year degree programme. They also take compulsory augmented modules in each of the Level 1 subjects. These augmented modules provide students with background knowledge and skills needed to succeed in an engineering degree. The curriculum for years four and five of the ENGAGE programme are identical to the curriculum for years 3 and 4 of the 4-year programme, respectively. Students may apply directly for admission to the programme.
Please note: All students will be required to successfully complete JCP 203, Community-based project 203, as part of the requirements for the BEng degree. A student may register for the module during any of the years of study of the programme, but preferably not during the first or the final year of study.
Promotion to the second semester of the first year and to the second year of study (Eng. 14)
Please note:
Promotion to the third year of study of the Four-year Programme, as well as to the third and the fourth years of study of the ENGAGE Programme. In case of the fourth year of study of the ENGAGE Programme, the words "first", "second" and "third" must be substituted with the words "second", "third" and "fourth" respectively. (Eng. 15)
Promotion to the fourth year of study of the Four-year Programme, as well as to the fifth year of study of the ENGAGE Programme. In case of the fifth year of study of the ENGAGE Programme, the words "second", "third" and "fourth" must be substituted with the words "third", "fourth" and "fifth" respectively. (Eng. 16)
Minimum credits: 128
Module content:
General introduction to inorganic, analytical and physical chemistry. Nomenclature of inorganic ions and compounds, stoichiometric calculations concerning chemical reactions, redox reactions, solubilities and solutions, atomic structure, periodicity. Molecular structure and chemical bonding using the VSEPR model. Principles of reactivity, electrochemistry, energy and chemical reactions, entropy and free energy.
Appropriate tutorial classes and practicals.
Module content:
Introductory mathematics: Symbols, exponents, logarithms, angles in degrees, radial measure, goniometry, differentiation, and integration. Motion along a straight line: position and displacement, acceleration. Vectors: adding vectors, components, multiplying vectors. Motion in two and three dimensions: projectile motion, circular motion. Force and motion: Newton’s Law, force, friction. Kinetic energy and work: work, power. Potential energy: Centre of mass, linear momentum. Collisions: impulse and linear momentum, elastic collisions, inelastic collisions. Rotation: kinetic energy of rotation, torque. Oscillations and waves: Simple harmonic motion, types of waves, wavelength and frequency, interference of waves, standing waves, the Doppler effect. Temperature, heat and the first law of thermodynamics.
Module content:
A project-based approach is followed towards the development of skills
needed for success in engineering. Skills include communication,
information technology, technology, academic and life skills. The
modules are presented in English.
Module content:
A project-based approach is followed towards the development of skills
needed for success in engineering. Skills include communication,
information technology, technology, academic and life skills. The
modules are presented in English.
Module content:
*This module is designed for first-year engineering students. Students will not be credited for more than one of the following modules for their degree: WTW 158, WTW 114, WTW 134, WTW 165.
Introduction to vector algebra. Functions, limits and continuity. Differential calculus of single variable functions, rate of change, graph sketching, applications. The mean value theorem, the rule of L'Hospital. Indefinite integrals, integration.
Module content:
*Attendance module only
The module is offered at the end of the first year of study and lasts at least eight days, during which training is given in the following workshops: electronic projects, panel wiring, electrical motors and switch gear, general machines, welding, turning and sheet metal work. Each student's progress is assessed after each workshop.
Module content:
Background knowledge, problem-solving skills, conceptual understanding and chemical reasoning skills required by CHM 171/172.
Module content:
Background knowledge, problem-solving skills, conceptual understanding and physical reasoning skills required by FSK 116/176.
Module content:
Background knowledge, problem-solving skills, conceptual understanding and mathematical reasoning skills required by WTW 158.
Module content:
Background knowledge, problem-solving skills, conceptual understanding and mathematical reasoning skills required by WTW 161 and WTW 168.
Module content:
Social sciences: Perspectives on contemporary society
An introduction to long-standing questions about the nature of human societies and contemporary challenges. Topics to be discussed include globalisation and increasing connectedness; rising unemployment, inequality and poverty; rapid urbanisation and the modern city form; transformations in the nature of work; environmental degradation and tensions between sustainability and growth; shifts in global power relations; the future of the nation-state and supra-national governance structures; and possibilities for extending human rights and democracy. Critical questions are posed about modern selfhood, sociality, culture and identity against the background of new communications technologies, ever more multicultural societies, enduring gender, class and race inequities, and the emergence of new and the resurgence of older forms of social and political identity. These issues are approached from the vantage of our location in southern Africa and the continent, drawing on social science perspectives.
Module content:
Humanities: Text, culture and communication
Successful communication of ideas, values and traditions depends on understanding both the literal and implied meanings of texts. In this module students are introduced to a variety of texts, including original literary and visual texts, with a view to developing an understanding of how textual meanings have been constructed and negotiated over time. Students are encouraged to understand themselves as products of – and participants in – these traditions, ideas and values. Appropriate examples will be drawn from, among others, the Enlightenment, Modernism, Existentialism, Postmodernism and Post-colonialism.
Module content:
*This module is designed for first-year engineering students. Students will not be credited for more than one of the following modules for their degree: WTW 146, WTW 148 and WTW 124,
Vector algebra with applications to lines and planes in space, matrix algebra, systems of linear equations, determinants, complex numbers, factorisation of polynomials and conic sections. Integration techniques, improper integrals. The definite integral, fundamental theorem of Calculus. Applications of integration. Elementary power series and Taylor’s theorem. Vector functions, space curves and arc lengths. Quadratic surfaces and multivariable functions.
Minimum credits: 136
Module content:
General physical-analytical chemistry: Physical behaviour of gases, liquids and solids, intermolecular forces, solutions, chemical equilibrium, acids and bases, buffers, precipitation. Organic chemistry: Structure (bonding) and functional groups, nomenclature, isomerism, introductory stereo-chemistry, introduction to chemical reactions and chemical properties of organic compounds.
Appropriate tutorial classes and practicals.
Module content:
Dimensions, units and their conversion. The mol unit, density, concentration. Specific volume, bulk density, density of ideal mixtures. Temperatures and conversions. Pressure, absolute and gauge. Expression of concentration. Empirical formulae. Introduction to material balances: strategy for solving problems. Material balances without chemical reaction. Combinations of equipment.
Module content:
Chemical reaction and stoichiometry, excess reactant, conversion, yield, selectivity. Material balances with recycle streams, bypass streams and purge streams. Gases, vapours and liquids: ideal gas law, SG and density of gases, Nm³. Material balances where gases are involved. Fuels and combustion: coal analysis, combustion calculations.
Module content:
Electrical quantities, units, definitions, conventions. Electrical symbols, ideal and practical current and voltage sources, controlled sources. Ohm’s law in resistive circuits, Kirchoff’s current and voltage laws, resistors in series and parallel circuits, voltage and current division, mesh current and node voltage methods. Circuit theorems: Linearity, superposition, Thevenin and Norton equivalent circuits, sources transformation, power calculation, maximum power transfer. Energy storage elements: current, voltage, power and energy in inductors and capacitors, inductors and capacitors in series and parallel. Ideal operational amplifiers and applications: inverting and noninverting amplifiers, summing amplifiers, current sources, integrators.
Module content:
This module is integrated into all undergraduate academic programmes offered by the Faculty. Main objectives: execution of a community project aimed at achieving a beneficial impact on a section of society; awareness of personal, social and cultural values and an understanding of social issues; and development of life skills. Assessment: project proposal, written progress reports, peer assessment, assessment by community, presentation, report presented in the form of a blog.
Module content:
Freehand sketching covering the following: perspective, isometric and orthographic drawings. Drawing conventions, graphical techniques and assembly drawings. Evaluation of drawings and error detection. True lengths of lines, projections and intersections. Practical applications of these techniques. Introduction to computer-aided drawings, including dimensioning, crosshatching and detailing. Introduction to basic manufacturing processes including primary (casting, forging and extrusion) and secondary (drilling, turning, milling, grinding, broaching and sawing) manufacturing procedures.
Module content:
Equivalent force systems, resultants. Newton's laws, units. Forces acting on particles. Rigid bodies: principle of transmissibility, resultant of parallel forces. Vector moments and scalar moments. Relationship between scalar- and vector moments. Couples. Equivalent force systems on rigid bodies. Resultants of forces on rigid bodies. Equilibrium in two and three dimensions. Hooke's law. Trusses and frameworks. Centroids and second moments of area. Beams: distributed forces, shear force, bending moment, method of sections, relationship between load, shear force and bending moment.
Module content:
Calculus of multivariable functions, directional derivatives. Extrema. Multiple integrals, polar, cylindrical and spherical coordinates. Line integrals and the theorem of Green. Surface integrals and the theorems of Gauss and Stokes.
Module content:
Numerical integration. Numerical methods to approximate the solution of non-linear equations, systems of equations (linear and non-linear), differential equations and systems of differential equations. Direct methods to solve linear systems of equations.
Module content:
Background knowledge, problem-solving skills, conceptual understanding and chemical reasoning skills required by CHM 181.
Module content:
Background knowledge, problem-solving skills, conceptual understanding and reasoning skills required by EBN 111/122.
Module content:
Background knowledge, conceptual understanding, drawing skills and reasoning skills required by MGC 110.
Module content:
Background knowledge, problem-solving skills, conceptual understanding and reasoning skills required by SWK 122.
Minimum credits: 138
Module content:
Engineering systems are often subjected to variation, uncertainty and incomplete information. Mathematical statistics provides the basis for effectively handling and quantifying the effect of these factors. This module provides an introduction to the concepts of mathematical statistics and will include the following syllabus themes: data analysis, probability theory, stochastic modelling, statistical inference and regression analysis.
Module content:
Organic chemistry. Chemical properties of organic (including aromatic) compounds. Functional group transformation and synthesis.
Module content:
Theory: Introduction to instrumental chemical analysis. Integration of electronic, chemical, optical and computer principles for the construction of analytical instrumentation. Detail discussion of principles and some instrumental methods from three disciplines within analytical chemistry, namely electrochemistry, spectroscopy and chromatography. This includes potentiometry, (AA) atomic absorption-, (ICP) atomic emission-, ultraviolet (UV)-, and infrared (IR) spectroscopy, potentiometric and photometric titrations, gas chromatography, liquid chromatography as well as combinations of these techniques. Practical: IR spectroscopy, UV spectroscopy, AA spectroscopy, potentiometric titration, gas chromatography.
Module content:
Vapour pressure, phase changes, equilibrium. Vapour/gas equilibrium; Henry’s law. Enthalpy and enthalpy balances. Heat of reaction. Data and data sources, steam tables. Enthalpy and combustion; flame temperature. Heats of solution and mixing. Miscible and immiscible liquid mixtures; dew point, bubble point. Simultaneous mass and enthalpy balances. PVT properties of real gases, PVT-diagrams of pure compounds. Vapour liquid equilibrium for ideal mixtures (Raoult's law).
Module content:
Simple applications of the first and second laws of thermodynamics. The concepts of work, heat, enthalpy and entropy. The calculation of internal energy, enthalpy and entropy using the equations of state. Simple heat engine cycles. Refrigeration and gas liquefaction. Process efficiency by means of energy. Introduction to non-ideality in VLE and mixing behaviour.
Module content:
Transient response phenomena in RC, RL and RLC circuits: Natural response and step response. Alternating current (AC) circuits: Phasors, impedances, and power in AC circuits. The application of Ohm’s law, Kirchoff’s circuit theorems, matrix methods, and Thevenin and Norton equivalents to sinusoidal steady-state analysis. Three-phase circuits: Balanced three-phase circuits, star/delta configurations, and three-phase power transfer calculations. Magnetically coupled circuits: Mutual inductance, coupling factor, transformers, ideal transformers and autotransformers. Application of circuit theory to induction motors: basic principles of induction motors, equivalent circuit and analysis thereof, calculation of power and torque through application of Thevenin's theorem. Synoptic introduction to other types of motors.
Module content:
Stresses, strains and the mechanical properties of materials: Normal stress and shear stress, tension and compression, equilibrium in shear, factor of safety, design, shear strain, stress/strain diagram, Hooke’s Law, Poisson’s Ratio and the shear stress/strain diagram. Axial loads: Elastic deformation, displacements, statically determinate and indeterminate structures and thermal effects. Torsion: Torsion of circular bars and power transmission bending of straight members and composite beams. Transverse shear: Shear in straight members and shear flow. Combined loads: Thin walled pressure vessels and stresses as a result of combined loads. Stress transformation: Plane stress transformation, principle stresses, maximum values and stress variation in prismatic beams. Strain transformation: Plane strain transformation, principle strains, maximum values, strain gauges and rosettes and the relationship between E, G and ?. Design of beams from section characteristics. Deflection of beams: The elastic curve, integration method, Macaulay’s method and superposition.
Module content:
Linear algebra, eigenvalues and eigenvectors with applications to first and second order systems of differential equations. Sequences and series, convergence tests. Power series with applications to ordinary differential equations with variable coefficients. Fourier series with applications to partial differential equations such as potential, heat and wave equations.
Module content:
Theory and solution methods for linear differential equations as well as for systems of linear differential equations. Theory and solution methods for first order non-linear differential equations. The Laplace transform with application to differential equations. Application of differential equations to modelling problems.
Module content:
Advanced spreadsheet applications: Named ranges, linear algebra, solution of systems of equations, regression, interpolation, optimisation and table manipulation. Basic structured programming: Looping, branching, subroutines, iteration, reading and writing data files. Development, coding and debugging of simple programs in a high level programming language. Programming principles are illustrated via mathematical concepts such as limits, differentiation, integration and linear algebra. Structured programming by making use of functions and available toolboxes. Basic graphical output (plotting is also covered). Different information resources, searching and management of information. Use of databases. Development of webpages. Hardware interaction and control of equipment and systems.
Module content:
Introduction to the synthesis, processing, structure, physical properties, and technical performance of important engineering materials: metals, ceramics, polymers and composites. Structural, mechanical, thermodynamic, and design related issues important to chemical engineering applications. Materials specification with emphasis on the corrosion of metals and life time estimation for polymer components.
Minimum credits: 144
Module content:
Characterisation and taxonomy of biological material. Biochemistry and the chemistry of life. Biological growth requirements, metabolism, growth kinetics and product formation. Enzyme chemistry and kinetics, basic stoichiometry of biological reactions as well as mass - and energy balances for these processes using a chemical engineering approach. Biological reactor, operation and downstream processing.
Module content:
Laboratory safety and general industrial safety practices. Techniques for planning of experiments. Experimental work illustrating: Analysis: Composition of coal and gas, heat of combustion, viscosity. Mass transfer: Gas absorption, batch distillation, azeotropic distillation, fractional distillation and liquid-liquid extraction. Heat transfer: Condenser, shell and tube heat exchanger, heat loss from insulated pipes. Piping system design: Frictional energy loss through pipes and fittings. Measuring equipment: Rate of flow, temperature. Reporting of laboratory results.
Module content:
Momentum transfer. Fluid statics. Control volume approach for conservation of mass, energy, and momentum. Application to pumps and turbines. Navier-Stokes equations, derivation and applications. Laminar and turbulent boundary layer theory. Heat transfer: fundamentals of heat transfer. Differential equations of heat transfer. Steady state conduction. Introduction to unsteady state conduction. Convection heat transfer and the thermal boundary layer. Radiation heat transfer. Mass transfer: fundamentals of mass transfer. Diffusion and the diffusion coefficient. Differential equations of mass transfer. Steady state molecular diffusion in one or more dimensions.
Module content:
*Attendance module only
At the end of the second year of study, students in Chemical Engineering undergo at least six weeks of prescribed practical training in the industry. The student must also attend all excursions organised during the year by the department. A satisfactory report on the practical training must be submitted to the Faculty Administration within one week of registration. In exceptional circumstances the prescribed minimum period can be reduced, as approved by the Chairman of the School of Engineering.
Module content:
Fundamentals of phase and chemical equilibrium with emphasis on vapour/liquid systems leading to the study of separations and reacting systems. Concepts and formalism of thermodynamics. Postulates and laws of thermodynamics. Thermodynamic functions (enthalpy, entropy, Gibbs free energy). Thermochemistry and Ellingham diagrams. Phase Equilibria: Phase diagrams of single substances, phase boundaries, the Phase Rule. Phase diagrams of mixtures, steam distillation, eutectic mixtures. Solution thermodynamics: Ideal and non-ideal solutions, excess properties and activity coefficient models. The equations of state of ideal and real gases, residual properties and fugacity. Vapour-liquid equilibrium from equations of state and the ?-? approach. Application of thermodynamics to equilibrium between fluid- (gas and liquid) and condensed (liquid and solid) phases. Chemical reaction equilibrium.
Module content:
Batch reactors; basic reaction kinetics; fitting of experimental reaction data; flow reactor basics.Module content:
Application of the continuity equations, transport equations and phase relationships to describe time-dependent behaviour of processes. Linearisation and use of transfer functions. Stability analysis, effect of dead time and inverse response. Elements of a control loop. Control principles and mechanisms.Module content:
Programme and systems engineering Concepts: Application of project management, systems thinking, systems approach, product, system and project life cycles, project phases and specification practices. Development models: stage-gate development, project charter, systems engineering models, systems engineering management and life cycle characteristics. Planning and Scheduling: task definition, work breakdown structures, duration estimation, Gantt charts, critical path, resource handling. Costs and Budgets: cost estimates, project life cycle costs, work authorisation. Control: project organisation. Legal: contracts, intellectual property. Case studies and semester project Engineering Economics Decision making in an engineering environment. Allocation of cost. Money-time relationships (discreet interest formulae, tables, financial calculator, Excel). Bases for comparison of alternatives (present worth, annual worth,). Decision making among alternatives before and after tax (useful lives equal to study period, useful lives different among alternatives).Module content:
Two exit learning outcomes (ELO) of ECSA are addressed and each must be passed in the same semester. ELO7: Demonstrate critical awareness of the impact of engineering activity on the social, industrial and physical environment. The history of engineering globally and in South Africa. Most important engineering projects globally and in South Africa. The impact of technology on society. Occupational and public health and safety. Occupational Health and Safety Act. Impacts on the physical environment. The personal, social, cultural values and requirements of those affected by engineering activity. The combination of social, workplace (industrial) and physical environmental factors are appropriate to the discipline of the qualification. ELO8: Demonstrate competence to work effectively on a small project as an individual, in teams and in multidisciplinary environments. Identifies and focuses on objectives. Works strategically. Executes tasks effectively. Delivers completed work on time. Effective team work: Makes individual contribution to team activity; performs critical functions; enhances work of fellow team members; benefits from support of team members; communicates effectively with team members; delivers completed work on time. Multidisciplinary work by the following: Acquires a working knowledge of co-workers’ discipline; uses a systems engineering approach; communicates across disciplinary boundaries. Report and presentation on team project. Tasks require co-operation across at least one disciplinary boundary. Students acquire a working knowledge of co-workers discipline. Students communicate between disciplinary boundaries.
Module content:
Steady and unsteady state conductive heat transfer in one to three dimensions. Temperature distributions. Convective heat transfer. Application of boundary layer theory. Determination of film coefficients. Design of heat transfer equipment. Radiant heat transfer. Application of the mechanical energy balance to single phase Newtonian fluids in steady state systems. Adjustment for multiphase, non-Newtonian as well as pulsating systems. Orifice design. Optimal economic choice of pipe diameters, pumps and control valves.
Module content:
Separation by means of equilibrium stages. Design of flash distillation systems, distillation columns, absorbers and strippers by hand and computer calculations. Design of membrane separation systems.
Module content:
Effective communication with engineering and technical audiences, as well as with the community at large, is taught. The emphasis is on written documentation. Formal communication is characterised by: the use of appropriate language and style; effective structuring of information; the use of modern electronic communication technologies, with emphasis on word processing, spreadsheets, appropriate email protocols, effective use of graphic information, effective and correct presentation of numerical data, correct referencing methods, seamless inclusion of mathematics expressions, tables, diagrams and appendices in written work; appropriate methods for levelling communication to the requirements of the target audience.
Minimum credits: 144
Module content:
Dynamic properties of equipment, instruments and processes. Mathematical modelling and computer simulation of processes in the time, Laplace and frequency domains. Linearisation and non-linear processes. Stability of control systems. Controller tuning. Methods for process identification. Digital process control. Z-transforms. Use of computers and microprocessors. Introduction to modern control theory: state-space approach. Applied process control. Choice of control instrumentation. Plantwide control strategy. Development of P and IDs.
Module content:
Application of chemical engineering principles for the complete design of a chemical plant.
Module content:
Design economics and process evaluation. Cost estimation and time-value of money. Control applications, choice of instrumentation and development of a plantwide control strategy. Development of PandID’s. Safety: Site plan and layout, area classification, hazard and operability analysis (HAZOP). Occupational Safety and Health Act, Engineering Profession of South Africa Act. Requirements to maintain continued competence and to keep abreast of up-to date tools and techniques. ECSA code of conduct, Continuing Professional Development, ECSA outcomes, ECSA process and reasons for registration as PrEng. Displays understanding of the system of professional development. Accepts responsibility for own actions. Displays judgment in decision making during problem solving and design. Limits decision making to area of current competence. Reason about and make judgment on ethical aspects in case study context. Discerns boundaries of competence in problem solving and design. Case studies typical of engineering practice situations in which the graduate is likely to participate.Module content:
Development of new processing plants; Evaluating process alternatives; Developing a process flowsheet using a process synthesis approach. Applying thermodynamic principles to obtain an optimal synthesis route. Applications using computer packages.
Module content:
*Attendance module only At the end of the third year of study, students in chemical engineering undergo at least six weeks of prescribed practical training in the industry. The student must also attend all excursions organised during the year by the department. A satisfactory report on the practical training must be submitted to the department within one week of registration. In exceptional circumstances the prescribed minimum period can be reduced, as approved by the chairman of the School of Engineering.Module content:
Heterogeneous catalysis: diffusion in reaction for catalyst pores and different catalyst geometries. Inter and intraparticle heat and mass transfer processes. Reactor design: energy and continuity equation for different types of reactor: stirred tank, pipe, radial flow, slurry and fluidised. Modelling of non-ideal flow in reactors.
Module content:
The execution of a complete literature study and research project on a chosen subject.
Module content:
Interpretation of the research results of CSC 411. The writing of a project report and scientific article.
Module content:
A module to be selected from the list of available specialisation topics, including Process Control, Chemical Product Design, Environmental Engineering, Nuclear Engineering, Polymer Processing, Reactor Design, and Water Utilisation Engineering.
Module content:
Pinch analysis and exergy analysis. Optimisation techniques. Flowsheet optimisation. Economic evaluation of processes. Applications using computer packages.
Module content:
Humidification and dehumidification of air. Water cooling, drying, crystallisation, ion exchange, particle technology, particle movement in a fluid, sedimentation. Hydrocyclones, flotation, filtration. Centrifuges. Fluidised bed technology. Mixing. Comminution. Pneumatic transport.
Copyright © University of Pretoria 2024. All rights reserved.
Get Social With Us
Download the UP Mobile App