Yearbooks

Program: BSc Engineering and Environmental Geology

Kindly take note of the disclaimer regarding qualifications and degree names.
Code Faculty Department
02133043 Faculty of Natural and Agricultural Sciences Department: Geology
Credits Duration NQF level
Minimum duration of study: 3 jaar Totale krediete: 420 NQF level:  07

Admission requirements

  • The closing date is an administrative admission guideline for non-selection programmes. Once a non-selection programme is full and has reached the institutional targets, then that programme will be closed for further admissions, irrespective of the closing date. However, if the institutional targets have not been met by the closing date, then that programme will remain open for admissions until the institutional targets are met.
  • The following persons will be considered for admission: candidates who are in possession of a certificate that is deemed by the University to be equivalent to the required National Senior Certificate with university endorsement, candidates who are graduates from another tertiary institution or have been granted the status of a graduate of such an institution, and candidates who are graduates of another faculty at the University of Pretoria.
  • Life Orientation is excluded from the calculation of the Admission Point Score (APS).
  • Grade 11 results are used for the conditional admission of prospective students. Final admission is based on Grade 12 results.
  • Please note that the Faculty does not accept GED and School of Tomorrow qualifications for entry into our programmes.

Transferring students

Candidates previously registered at UP or at another university

The faculty’s Admissions Committee considers applications of candidates who have already completed the final NSC or equivalent qualification examination and/or were previously registered at UP or another university, on grounds of their final NSC or equivalent qualification results as well as academic merit.

Candidates previously registered at a FET college or a university of technology

The faculty’s Admissions Committee considers the application of these candidates on the grounds of their final NSC or equivalent qualification results as well as academic merit.

Qualifications from countries other than South Africa

  • Citizens from countries other than South Africa and South African citizens with foreign qualifications must comply with all the other admission requirements and the prerequisites for subjects/modules.
  • In addition to meeting the admission requirements, admission is based on the performance in the TOEFL, IELTS or SAT, if required.
  • Candidates must have completed the National Senior Certificate with admission to degree studies or a certificate of conditional exemption on the basis of a candidate’s foreign qualifications, the so-called “Immigrant” or “Foreign Conditional Exemption”. The only condition for the “Foreign Conditional Exemption” that is accepted is: ‘completion of the degree course’. The exemption certificate is obtainable from Universities South Africa (USAf). Detailed information is available on the website at click here.

University of Pretoria website: click here

Minimum requirements

Achievement level

English Home Language or English First Additional Language

Mathematics

Physical Sciences  

APS

NSC/IEB

AS Level

NSC/IEB

AS Level

NSC/IEB

AS Level

5

C

5

C

5

C

34

*  Cambridge A level candidates who obtained at least a D in the required subjects, will be considered for admission. Students in the Cambridge system must offer both Physics AND Chemistry with performance at the level specified for NSC Physical Sciences in the table above.

*  International Baccalaureate (IB) HL candidates who obtained at least a 4 in the required subjects, will be considered for admission. Students in the IB system must offer both Physics AND Chemistry with performance at the level specified for NSC Physical Sciences in the table above.

Candidates who do not comply with the minimum admission requirements for BSc (Engineering and Environmental Geology), may be considered for admission to the BSc – Extended programme – Physical Sciences. This programme takes a year longer than the normal programmes to complete.

BSc – Extended Programme – Physical Sciences

 Minimum requirements

Achievement level

English Home Language or English First Additional Language

Mathematics

Physical Sciences  

APS

NSC/IEB

AS Level

NSC/IEB

AS Level

NSC/IEB

AS Level

4

D

4

D

4

D

28

 

Other programme-specific information

A student must pass all the minimum prescribed and elective module credits as set out at the end of each year within a programme as well as the total required credits to comply with the particular degree programme. Please refer to the curricula of the respective programmes. At least 144 credits must be obtained at 300-/400-level, or otherwise as indicated by curriculum. The minimum module credits needed to comply with degree requirements is set out at the end of each study programme. Subject to the programmes as indicated a maximum of 150 credits will be recognised at 100-level. A student may, in consultation with the relevant head of department and subject to the permission by the Dean, select or replace prescribed module credits not indicated in BSc three-year study programmes to the equivalent of a maximum of 36 module credits.

It is important that the total number of prescribed module credits is completed during the course of the study programme. The Dean may, on the recommendation of the relevant head of department, approve deviations in this regard. Subject to the programmes as indicated in the respective curricula, a student may not register for more than 75 module credits per semester at first-year level subject to permission by the Dean. A student may be permitted to register for up to 80 module credits in a the first semester during the first year provided that he or she obtained a final mark of no less than 70% for grade 12 Mathematics and achieved an APS of 34 or more in the NSC.

Students who are already in possession of a bachelor’s degree, will not receive credit for modules of which the content overlap with modules from the degree that was already conferred. Credits will not be considered for more than half the credits passed previously for an uncompleted degree. No credits at the final-year or 300- and 400-level will be granted.

The Dean may, on the recommendation of the programme manager, approve deviations with regard to the composition of the study programme.

Please note: Where elective modules are not specified, these may be chosen from any modules appearing in the list of modules.

It remains the student’s responsibility to acertain, prior to registration, whether they comply with the prerequisites of the modules they want to register for.

The prerequisites are listed in the Alphabetical list of modules.

Promotion to next study year

A student will be promoted to the following year of study if he or she passed 100 credits of the prescribed credits for a year of study, unless the Dean on the recommendation of the relevant head of department decides otherwise. A student who does not comply with the requirements for promotion to the following year of study, retains the credit for the modules already passed and may be admitted by the Dean, on recommendation of the relevant head of department, to modules of the following year of study to a maximum of 48 credits, provided that it will fit in with both the lecture and examination timetable.

General promotion requirements in the faculty
All students whose academic progress is not acceptable can be suspended from further studies.

  • A student who is excluded from further studies in terms of the stipulations of the abovementioned regulations, will be notified in writing by the Dean or Admissions Committee at the end of the relevant semester.
  • A student who has been excluded from further studies may apply in writing to the Admissions Committee of the Faculty of Natural and Agricultural Sciences for re-admission.
  • Should the student be re-admitted by the Admissions Committee, strict conditions will be set which the student must comply with in order to proceed with his/her studies.
  • Should the student not be re-admitted to further studies by the Admissions Committee, he/she will be informed in writing.
  • Students who are not re-admitted by the Admissions Committee have the right to appeal to the Senate Appeals Committee.
  • Any decision taken by the Senate Appeals Committee is final.

Pass with distinction

A student obtains his or her degree with distinction if all prescribed modules at 300-level (or higher) are passed in one academic year with a weighted average of at least 75%, and obtain at least a subminimum of 65% in each of the relevant modules.

Minimum krediete: 126

Fundamental =   14
Core             =   112

Fundamental modules

Core modules

  • Module-inhoud:

    General introduction to inorganic, analytical and physical chemistry. Atomic structure and periodicity. Molecular structure and chemical bonding using the VSEOR model. Nomenclature of inorganic ions and compounds. Classification of reactions: precipitation, acid-base, redox reactions and gas-forming reactions. Mole concept and stoichiometric calculations concerning chemical formulas and chemical reactions. Principles of reactivity: energy and chemical reactions. Physical behaviour gases, liquids, solids and solutions and the role of intermolecular forces. Rate of reactions: Introduction to chemical kinetics.

    Sien meer

  • Module-inhoud:

    Theory: General physical-analytical chemistry: Chemical equilibrium, acids and bases, buffers, solubility equilibrium, entropy and free energy, electrochemistry. Organic chemistry: Structure (bonding), nomenclature, isomerism, introductory stereochemistry, introduction to chemical reactions and chemical properties of organic compounds and biological compounds, i.e. carbohydrates and aminoacids. Practical: Molecular structure (model building), synthesis and properties of simple organic compounds.

    Sien meer

  • Module-inhoud:

    Solar system; structure of solid matter; minerals and rocks; introduction to symmetry and crystallography; important minerals and solid solutions; rock cycle; classification of rocks. External geological processes (gravity, water, wind, sea, ice) and their products (including geomorphology). Internal structure of the earth. The dynamic earth – volcanism, earthquakes, mountain building – the theory of plate tectonics. Geological processes (magmatism, metamorphism, sedimentology, structural geology) in a plate tectonic context. Geological maps and mineral and rock specimens. Interaction between man and the environment, and nature of anthropogenic climate change.

    Sien meer

  • Module-inhoud:

    This module will give an overview of earth history, from the Archaean to the present. Important concepts such as the principles of stratigraphy and stratigraphic nomenclature, geological dating and international and South African time scales will be introduced. A brief introduction to the principles of palaeontology will be given, along with short descriptions of major fossil groups, fossil forms, ecology and geological meaning. In the South African context, the major stratigraphic units, intrusions and tectonic/metamorphic events will be detailed, along with related rock types, fossil contents, genesis and economic commodities. Anthropogenic effects on the environment and their mitigation. Practical work will focus on the interpretation of geological maps and profiles.

    Sien meer

  • Module-inhoud:

    SI-units. Significant figures. Waves: intensity, superposition, interference, standing waves, resonance, beats, Doppler. Geometrical optics: Reflection, refraction, mirrors, thin lenses, instruments. Physical optics: Young-interference, coherence, diffraction, polarisation. Hydrostatics and dynamics: density, pressure, Archimedes’ principle, continuity, Bernoulli. Heat: temperature, specific heat, expansion, heat transfer. Vectors. Kinematics of a point: Relative, projectile, and circular motion. Dynamics: Newton’s laws, friction. Work: point masses, gasses (ideal gas law), gravitation, spring, power. Kinetic energy: Conservative forces, gravitation, spring. Conservation of energy. Conservation of momentum. Impulse and collisions. System of particles: Centre of mass, Newton’s laws. Rotation: torque, conservation of angular momentum, equilibrium, centre of gravity.

    Sien meer

  • Module-inhoud:

    Equivalent force systems, resultants. Newton's laws, units. Forces acting on particles. Rigid bodies: principle of transmissibility, resultant of parallel forces. Vector moments and scalar moments. Relationship between scalar- and vector moments. Couples. Equivalent force systems on rigid bodies. Resultants of forces on rigid bodies. Equilibrium in two and three dimensions. Hooke's law. Trusses and frameworks. Centroids and second moments of area. Beams: distributed forces, shear force, bending moment, method of sections, relationship between load, shear force and bending moment.

    Sien meer

  • Module-inhoud:

    *This module serves as preparation for students majoring in Mathematics (including all students who intend to enrol for WTW 218 and WTW 220). Students will not be credited for more than one of the following modules for their degree: WTW 114, WTW 158, WTW 134, WTW 165.
    Functions, limits and continuity. Differential calculus of single variable functions, rate of change, graph sketching, applications. The mean value theorem, the rule of L'Hospital. Definite and indefinite integrals, evaluating definite integrals using anti-derivatives, the substitution rule.

    Sien meer

Minimum krediete: 142

Core             =   94
Elective         =   48

Additional information:
Students who do not intend to continue with Mathematics on third year level may replace WTW 220 with WTW 224
A block of 48 elective credits must be selected from the following-

  • Chemistry: CMY 282, CMY 283, CMY 284, CMY 285 (48 credits)
  • Mathematics: WTW 211, WTW 218, WTW 220, WTW 221 (48 credits)
  • Applied Mathematics: WTW 211, WTW 218, WTW 248, WTW 264 (48 credits)
  • GIS/Geomorphology: GGY 252, GIS 220, GGY 201 (36 credits)

Core modules

  • Module-inhoud:

    Note: Enrolment is limited. Preference will be given based on choice of majors. Students should enquire at the department if they wish to register for the module, but are unable to do so.
    *GIS 221 does not lead to admission to any module at 300 level.
    Introduction to Geographic Information Systems (GIS), theoretical concepts and applications of GIS. The focus will be on the GIS process of data input, data analysis, data output and associated technologies.This module teaches students to use GIS as a tool. Examples used throughout the course are drawn from South African case studies.

    Sien meer

  • Module-inhoud:

    Origin and development of soil, weathering and soil formation processes. Profile differentiation and morphology. Physical characteristics: texture, structure, soil water, atmosphere and temperature. Chemical characteristics: clay minerals, ion exchange, pH, buffer action, soil acidification and salinisation of soil. Soil fertility and fertilisation. Soil classification. Practical work: Laboratory evaluation of simple soil characteristics. Field practicals on soil formation in the Pretoria area.

    Sien meer

  • Module-inhoud:

    Introduction to sedimentology; grain studies; composition and textures of sedimentary rocks; flow dynamics and behaviour of sediment particles in transport systems; description and genesis of sedimentary structures; diagenesis; depositional environments and their deposits, modern and ancient; chemical sedimentary rocks; economic sedimentology; field data acquisition from sedimentary rocks and writing of reports; sieve analysis; Markov analysis; analysis of palaeocurrent trends; interpretation of sedimentary profiles.

    Sien meer

  • Module-inhoud:

    Fundamental concepts in mineralogy, and practical applications of mineralogy, including: the basics of crystal structure; the crystallographic groups; the rules of atomic substitution; phase transitions and phase diagrams; the structure and uses of olivine, pyroxene, feldspar, amphibole, mica, aluminosilicates, garnet, cordierite, and more uncommon mineral groups such as oxides, sulphides and carbonates; the calculation of mineral formulae from chemical analyses using various methods. Practical sessions: the basics of optical mineralogy and the use of transmitted light microscopy for thin section examination of minerals and rocks; the practicals will develop mineral identification skills for the minerals covered in the lectures, and cover basic textural identification.

    Sien meer

  • Module-inhoud:

    Classification and nomenclature of igneous rocks. The nature of silicate melts; physical and chemical factors influencing crystallisation and textures of igneous rocks. Phase diagrams, fractional crystallisation and partial melting. Trace elements and isotopes, and their use in petrogenetic studies. Global distribution of magmatism and its origin. Mid-oceanic ridges, active continental margins, intraplate magmatism. Classification of metamorphic rocks. Anatexis, migmatite and granite; eclogite. Metamorphic textures. PT-time loops. Metamorphism in various plate tectonic environments.

    Sien meer

  • Module-inhoud:

    Introduction to field mapping techniques.

    Sien meer

  • Module-inhoud:

    Stresses, strains and the mechanical properties of materials: Normal stress and shear stress, tension and compression, equilibrium in shear, factor of safety, design, shear strain, stress/strain diagram, Hooke’s Law, Poisson’s Ratio and the shear stress/strain diagram. Axial loads: Elastic deformation, displacements, statically determinate and indeterminate structures and thermal effects. Torsion: Torsion of circular bars and power transmission bending of straight members and composite beams. Transverse shear: Shear in straight members and shear flow. Combined loads: Thin walled pressure vessels and stresses as a result of combined loads. Stress transformation: Plane stress transformation, principle stresses, maximum values and stress variation in prismatic beams. Strain transformation: Plane strain transformation, principle strains, maximum values, strain gauges and rosettes and the relationship between E, G and µ. Design of beams from section characteristics. Deflection of beams: The elastic curve, integration method, Macaulay’s method and superposition.

    Sien meer

Elective modules

  • Module-inhoud:

    Theory: Classical chemical thermodynamics, gases, first and second law and applications, physical changes of pure materials and simple compounds. Phase rule: Chemical reactions, chemical kinetics, rates of reactions.

    Sien meer

  • Module-inhoud:

    Statistical evaluation of data in line with ethical practice, gravimetric analysis, aqueous solution chemistry, chemical equilibrium, precipitation-, neutralisation- and complex formation titrations, redox titrations, potentiometric methods, introduction to electrochemistry. Examples throughout the course demonstrate the relevance of the theory to meeting the sustainable development goals of clean water and clean, affordable energy. 

    Sien meer

  • Module-inhoud:

    Resonance, conjugation and aromaticity. Acidity and basicity. Introduction to 13C NMR spectroscopy. Electrophilic addition: alkenes. Nucleophilic substitution, elimination, addition: alkyl halides, alcohols, ethers, epoxides, carbonyl compounds: ketones, aldehydes, carboxylic acids and their derivatives Training in an ethical approach to safety that protects self, others and the environment is integral to the practical component of the course.

    Sien meer

  • Module-inhoud:

    Atomic structure, structure of solids (ionic model). Coordination chemistry of transition metals: Oxidation states of transition metals, ligands, stereochemistry, crystal field theory, consequences of d-orbital splitting, chemistry of the main group elements, electrochemical properties of transition metals in aqueous solution, industrial applications of transition metals. Fundamentals of spectroscopy and introduction to IR spectroscopy. During practical training students learn to acquire and report data ethically. Practical training also deals with the misuse of chemicals and appropriate waste disposal to protect the environment and meet the UN sustainable development goals.

    Sien meer

  • Module-inhoud:

    The module introduces students to urban settlement patterns, processes and structures. Using a series of case studies, it aims to develop an understanding of the challenges facing urban areas both in South Africa and globally.

    Sien meer

  • Module-inhoud:

    Physical processes that influence the earth’s surface and management. Specific processes and their interaction in themes such as weathering; soil erosion; slope, mass movement and periglacial processes. Practical laboratory exercises and assignments are based on the themes covered in the module theory component.

    Sien meer

  • Module-inhoud:

    The nature of geographical data and measurement.Application of statistics in the geographical domain. Probability, probability distributions and densities, expected values and variances, Central Limit theorem. Sampling techniques. Exploratory data analysis, descriptive statistics, statistical estimation, hypothesis testing, correlation analysis and regression analysis. Examples used throughout the course are drawn from South African and African case studies and taught within the framework of the UN Sustainable Development Goals.

    Sien meer

  • Module-inhoud:

    This is an introduction to linear algebra on Rn. Matrices and linear equations, linear combinations and spans, linear independence, subspaces, basis and dimension, eigenvalues, eigenvectors, similarity and diagonalisation of matrices, linear transformations.

    Sien meer

  • Module-inhoud:

    Calculus of multivariable functions, directional derivatives. Extrema and Lagrange multipliers. Multiple integrals, polar, cylindrical and spherical coordinates.

    Sien meer

  • Module-inhoud:

    *This module is recommended as an elective only for students who intend to enrol for WTW 310 and/or WTW 320. Students will not be credited for more than one of the following modules for their degree: WTW 220 and WTW 224.

    Properties of real numbers. Analysis of sequences and series of real numbers. Power series and theorems of convergence. The Bolzano-Weierstrass theorem. The intermediate value theorem and analysis of real-valued functions on an interval. The Riemann integral: Existence and properties of the interval.

    Sien meer

  • Module-inhoud:

    Abstract vector spaces, change of basis, matrix representation of linear transformations, orthogonality, diagonalisability of symmetric matrices, some applications.

    Sien meer

  • Module-inhoud:

    *This module does not lead to admission to WTW 310 or WTW 320. Students will not be credited for more than one of the following modules for their degree: WTW 220 and WTW 224.
    Sequences of real numbers: convergence and monotone sequences. Series of real numbers: convergence, integral test, comparison tests, alternating series, absolute convergence, ratio and root tests. Power series: representation of functions as power series, Taylor and Maclaurin series. Application to series solutions of differential equations. 

    Sien meer

  • Module-inhoud:

    Vectors and geometry. Calculus of vector functions with applications to differential geometry, kinematics and dynamics. Vector analysis, including vector fields, line integrals of scalar and vector fields, conservative vector fields, surfaces and surface integrals, the Theorems of Green, Gauss and Stokes with applications.

    Sien meer

  • Module-inhoud:

    *Students will not be credited for both WTW 162 and WTW 264 or both WTW 264 and WTW 286 for their degree.


    Theory and solution methods for ordinary differential equations and initial value problems: separable and linear first order equations, linear equations of higher order, systems of linear equations. Laplace transform.

    Sien meer

Minimum krediete: 138

Core             =   122 
Elective         =    16

Additional information:
Either GLY 367 (24 credits) or SGM 323 (16 credits) must be taken in the second semester.

Core modules

  • Module-inhoud:

    The more exact chemistry of soils systematically explained by understanding the particular chemical principles. Charge origin. Chemical equilibriums. Manifestations of sorption. Ion exchange. Acidic soils, saline soils and the organic fraction of soil. The chemistry of the important plant nutrient elements P, K and N is explained.

    Sien meer

  • Module-inhoud:

    A taxonomic system for South Africa. USDA’s Soil Taxonomy. Land suitability evaluation. Optimal resource utilization. The conservation component. Ecological aspects. Ecotype, land types. Soil maps. Practical work: Field practicals and compulsory excursion. Identification of soil horizons, forms and families. Land suitability evaluation. Elementary mapping exercise.

    Sien meer

  • Module-inhoud:

    Integrated theoretical and practical course dealing with the principles of rock deformation and analysis of deformed rocks. Stress, strain and rheology, joints, experimental rock deformation, fault systems and Anderson's theory of faulting. Folds and interference folding, tectonic fabrics, shear zone, progressive deformation. Stereographic projection and structural analysis.

    Sien meer

  • Module-inhoud:

    The hydrological cycle, water resources and water usage; porosity and permeability, heterogeneity and isotropy; the occurrence of groundwater, vadose and phreatic zones; aquifer types, relations and groundwater flow; hydrostratigraphy, surface water and groundwater interaction, springs; water balance, water flow, recharge and baseflow; Darcy’s Law, hydraulic conductivity and subsurface flow; capillarity, hydraulics, Bernoulli’s equation and the continuity principle; hydraulic parameters and their derivation from aquifer pumping tests, including Theis, Cooper-Jacob and other modifications; water quality, solubility, natural waters, ionic balance and plotting water chemistry data; groundwater mining, aquifer compaction and subsidence; saline intrusion, dryland salinity, pollution, NAPLs; site remediation and toxicology.

    Sien meer

  • Module-inhoud:

    Advanced field mapping techniques.

    Sien meer

  • Module-inhoud:

    Definition and scope of engineering geology; engineering geological properties and problems of rocks and soils within different stratigraphic units and climatic regions in southern Africa. Strength and failure modes of rock material and rock failure criteria. The characteristics of joints in rock. Joint line surveys and interpretation of data. Characteristics of a rock mass, rock mass classification and determination of strength. Slope stability in surface mines. Induced seismicity due to deep mining and rock bursts. This is in support of United Nationals Sustainable Development Goals dealing with clean water, sanitation, infrastructure development.

    Sien meer

  • Module-inhoud:

    Introduction to soil mechanics. Introduction to clay mineralogy. Mass, volume relationships and phases of soil. Groundwater flow and permeability. Effective stress principles. Suction pressures in saturated as well as partially saturated soil. The Mohr circle and stresses at a point. The Mohr-Coulomb strength theory and the stress-strain properties of soil. The Boussinesq theory. Consolidation theory and soil settlement.

    Sien meer

Elective modules

  • Module-inhoud:

    This module details the genesis and exploitation of major ore deposits, with an emphasis on South African examples. The processes through which ore deposits are formed and modified will be discussed, highlighting the relevance of sedimentary, metamorphic and igneous processes in the genesis of world-class ore bodies. The module will also address the methods of mining commonly used, and the international commodity market, including a brief introduction to ore reserve estimation and the evaluation of potential ore deposits. The section of the module involving mineral exploration and mining will emphasize the need of pursuing a sustainable mineral resources development mindset, by addressing and sharing ideas on the impact that mining has on environmental, social and economic issues including community welfare, impact of mining on land use, and rehabilitation post mining.

    Sien meer

  • Module-inhoud:

    Application of consolidation theory. Bearing capacity of soil and foundation design, Terzaghi and general methods. Horizontal stresses in soil and design of retaining structures, Rankine and Couloumb’s methods. Slope stability including Bishop’s method of slices. Introduction to site investigation.

    Sien meer


Die inligting wat hier verskyn, is onderhewig aan verandering en kan na die publikasie van hierdie inligting gewysig word.. Die Algemene Regulasies (G Regulasies) is op alle fakulteite van die Universiteit van Pretoria van toepassing. Dit word vereis dat elke student volkome vertroud met hierdie regulasies sowel as met die inligting vervat in die Algemene Reëls sal wees. Onkunde betrefffende hierdie regulasies en reels sal nie as ‘n verskoning by oortreding daarvan aangebied kan word nie.

Copyright © University of Pretoria 2024. All rights reserved.

COVID-19 Corona Virus South African Resource Portal

To contact the University during the COVID-19 lockdown, please send an email to [email protected]

FAQ's Email Us Virtual Campus Share Cookie Preferences