Yearbooks

Programme: BEng Civil Engineering ENGAGE

Kindly take note of the disclaimer regarding qualifications and degree names.
Code Faculty
12136007 Faculty of Engineering, Built Environment and Information Technology
Credits Duration NQF level
Minimum duration of study: 5 years Total credits: 680 NQF level:  08

Programme information

Please note: The Engineering Augmented Degree Programme (ENGAGE) is an extended degree programme with a five-year curriculum. It is designed to enable students who show academic potential but who do not meet the normal entry requirements for the four-year degree programme, to obtain an Engineering degree. ENGAGE students spend the first three years of the programme covering the content of the first two years of the four-year degree programme. They also take compulsory augmented modules in each of the Level 1 subjects. These augmented modules provide students with background knowledge and skills needed to succeed in an engineering degree. The curriculum for years four and five of the ENGAGE programme are identical to the curriculum for years 3 and 4 of the 4-year programme, respectively. Students may apply directly for admission to the programme.

  • Students must register for the entire programme, not components of it. The curriculum is fixed; there are no electives.
  • Attendance at all components of years 1 to 3 of the programme is compulsory. Non-attendance will only be condoned in the case of illness (sick note required) or family crisis (e.g. a death in the family), in which case students must inform the programme administration immediately.
  • Students who fail to meet the attendance requirement for any module in any semester of years 1 to 3 of the programme will be excluded from the programme.
  • No augmented module may be repeated more than once.
  • Selection into the programme will be based on a combination of performance in the National Senior Certificate examinations or equivalent and other selection tests approved by the faculty.
  • A student who fails a mainstream module (e.g. Chemistry) but passes the associated augmented module (e.g. Additional chemistry) does not need to repeat the augmented module.
  • A student who fails an augmented module (e.g. Additional chemistry) but passes the associated mainstream module (e.g. Chemistry) does not need to repeat the mainstream module.
  • A student must meet the attendance requirement and obtain at least 40% for both the continuous assessment and test components as well as a final mark of 50% in order to pass an augmented module.
  1. The curricula of the fourth and the fifth years of study are identical to those of the third and the fourth years of the four-year programme.
  2. JPO 110 is a prerequisite for JPO 120. Credit for JPO is obtained with a final mark of more than 50%. Conditional admission to JPO 120: If the final mark for JPO 110 is between 45% and 49%, a student can register for JPO 120 but credit for JPO 110 and JPO 120 will only be obtained if the final combined mark for JPO 110 and JPO 120 is above 50%.

Please note: All students will be required to successfully complete JCP 203, Community-based project 203, as part of the requirements for the BEng degree. A student may register for the module during any of the years of study of the programme, but preferably not during the first or the final year of study.

Learning outcomes of the BEng degree:
A graduate in engineering should be able to apply the following skills on an advanced level:

  1. Engineering problem solving.
  2. Application of specialist and fundamental knowledge, with specific reference to mathematics, basic sciences and engineering sciences.
  3. Engineering design and synthesis.
  4. Investigation, experimentation and data analysis.
  5. Engineering methods, skills, tools and information technology.
  6. Professional and general communication.
  7. Awareness and knowledge of the impact of engineering activity on society and the physical environment.
  8. Work in teams and in multidisciplinary environments.
  9. An awareness and ability for lifelong learning.
  10. An awareness and knowledge of principles of professional ethics and practice.
  11. Awareness and knowledge of engineering management principles and economic decision-making.

Learning contents of the BEng programmes:
Six essential knowledge areas are included in the syllabi of the programmes. The typical representation of each knowledge area as a percentage of the total contents of an undergraduate programme is given in brackets ( ) in the list below. This percentage varies for the different study directions, but conforms in all instances to the minimum knowledge area content as stipulated by ECSA.
Knowledge areas:

  1. Mathematics, including numerical methods and statistics (13%)
  2. Basic sciences: the natural sciences essential to the programme (15%)
  3. Engineering sciences (40%)
  4. Engineering design and synthesis (16%)
  5. Computing and information technology (5%)
  6. Complementary studies: communication, economy, management, innovation, environmental impact, ethics, engineering practice (11%).

Promotion to next study year

Promotion to the second semester of the first year and to the second year of study (Eng. 14)

  1. A new first-year student who has failed in all the prescribed modules of the programme at the end of the first semester, is excluded from studies in the School of Engineering. A student who is registered for the Engineering Augmented Degree Programme and has passed only 8 credits will also be excluded.
  2. A student who complies with all the requirements of the first year of study, is promoted to the second year of study.
  3. A student who has not passed at least 70% of the credits of the first year of study after the November examinations, must reapply for admission should he/she intend to proceed with his/her studies. Application on the prescribed form must be submitted to the Student Administration of the School of Engineering not later than 11 January. Late applications will be accepted only in exceptional circumstances after approval by the Dean. Should first-year students be readmitted, conditions of readmission will be determined by the Admissions Committee.
  4. Students who have not passed all the prescribed modules at first year level (level 100), as well as students who are readmitted in terms of Faculty Regulations must register for the outstanding first-year level (level-100) modules.
  5. A student who is repeating his or her first year, may, on recommendation of the relevant heads of department and with the approval of the Dean, be permitted to enroll for modules of the second-year of study in addition to the first-year modules which he or she failed, providing that he or she complies with the prerequisites for the second-year modules and no timetable clashes occur. Students on the ENGAGE programme may, following the same procedure, be permitted to enrol for level-200 modules in addition to the level-100 modules which he/she failed providing that he/she complies with the prerequisites for the modules at 200-level and no timetable clashes occur. On recommendation of the relevant head of department and with special permission from the Dean, permission may be granted to exceed the prescribed number of credits. The total number of credits which may be approved may not exceed the normal number of credits per semester by more than 16 credits.
  6. Students in Computer, Electrical and Electronic Engineering, who fail a first-year module for the second time, forfeit the privilege of registering for any modules of an advanced year of study.


Please note:

  1. From the second year of study each student should be in possession of an approved calculator. It is assumed that each student will have easy access to a laptop computer.
  2. Students who intend transferring to Mining Engineering, must familiarise themselves with the stipulations set out in the syllabi of PWP 121 Workshop practice 121.


Promotion to the third year of study of the Four-year Programme, as well as to the third and the fourth years of study of the ENGAGE Programme. In case of the fourth year of study of the ENGAGE Programme, the words "first", "second" and "third" must be substituted with the words "second", "third" and "fourth" respectively. (Eng. 15)

  1. A student who complies with all the requirements of the second year of study, is promoted to the third year of study.
  2. A student must pass all the prescribed modules at first year level (level 100) before he or she is admitted to any module at third year level (level 300).
  3. A student who is repeating his or her second year must register for all the second-year modules still outstanding. Such a student may, on recommendation of the relevant head of department and with the approval of the Dean, be permitted to enroll for modules of the third year of study in addition to the second-year modules which he or she failed, providing that he or she complies with the prerequisites for the third-year modules and no timetable clashes occur. On recommendation of the relevant head of department, and with special permission from the Dean, permission may be granted to exceed the prescribed number of credits. The total number of credits which may be approved may not exceed the normal number of credits per semester by more than 16 credits.
  4. Students in Computer, Electrical and Electronic Engineering who fail a second-year module for the second time forfeit the privilege of registering for any modules of the third year of study.
  5. Students who intend transferring to Mining Engineering must familiarise themselves with the stipulations set out in the syllabi of PWP 120 Workshop practice 120, as well as PPY 317 Practical training 317.


Promotion to the fourth year of study of the Four-year Programme, as well as to the fifth year of study of the ENGAGE Programme. In case of the fifth year of study of the ENGAGE Programme, the words "second", "third" and "fourth" must be substituted with the words "third", "fourth" and "fifth" respectively. (Eng. 16)

  1. A student who complies with all the requirements of the third year of study is promoted to the fourth year of study. A student who does not comply with all the requirements but who is able to register for all outstanding modules in order to complete the degree programme, may at registration be promoted to the fourth year of study.
  2. A student must pass all the prescribed modules of the second year of study, before he or she is admitted to any module of the fourth year of study.
  3. A student who has not passed all the prescribed modules of the third year of study, must register for the outstanding modules. A student may be admitted by the Dean, on the recommendation of the relevant head of department, to modules of the fourth year of study, in addition to the outstanding third-year modules, provided that he or she complies with the prerequisites of the fourth-year modules and no timetable clashes occur. The total number of credits per semester for which a student registers may not exceed the normal number of credits per semester by more than 16 credits. In exceptional cases, the Dean may, on recommendation of the relevant head of department, permit a student to exceed the above limit.
  4. Students in Computer, Electrical and Electronic Engineering who fail a third-year module for the second time, forfeit the privilege of registering for any modules of the fourth year of study.

Pass with distinction

  1. A student graduates with distinction if:
  1. no module of the third or fourth year of study of the four year programme or of the fourth or fifth year of the ENGAGE programme was repeated and a weighted average of at least 75% was obtained in one year in all the modules of the final year of study; and
  2. the degree programme was completed within the prescribed four years for the four year programme and within the prescribed five years of the ENGAGE programme.
  1. Exceptional cases to the above will be considered by the Dean.

Minimum credits: 128

Fundamental modules

Core modules

  • Module content:

    General introduction to inorganic, analytical and physical chemistry. Nomenclature of inorganic ions and compounds, stoichiometric calculations concerning chemical reactions, redox reactions, solubilities and solutions, atomic structure, periodicity. Molecular structure and chemical bonding using the VSEPR model. Principles of reactivity, electrochemistry, energy and chemical reactions, entropy and free energy.
    Appropriate tutorial classes and practicals.

    View more

  • Module content:

    Introductory mathematics: Symbols, exponents, logarithms, angles in degrees, radial measure, goniometry, differentiation, and integration. Motion along a straight line: position and displacement, acceleration. Vectors: adding vectors, components, multiplying vectors. Motion in two and three dimensions: projectile motion, circular motion. Force and motion: Newton’s Law, force, friction. Kinetic energy and work: work, power. Potential energy: Centre of mass, linear momentum. Collisions: impulse and linear momentum, elastic collisions, inelastic collisions. Rotation: kinetic energy of rotation, torque.  Oscillations and waves: Simple harmonic motion, types of waves, wavelength and frequency, interference of waves, standing waves, the Doppler effect. Temperature, heat and the first law of thermodynamics.

    View more

  • Module content:

    Social sciences: Perspectives on contemporary society
    An introduction to long-standing questions about the nature of human societies and contemporary challenges. Topics to be discussed include globalisation and increasing connectedness; rising unemployment, inequality and poverty; rapid urbanisation and the modern city form; transformations in the nature of work; environmental degradation and tensions between sustainability and growth; shifts in global power relations; the future of the nation-state and supra-national governance structures; and possibilities for extending human rights and democracy. Critical questions are posed about modern selfhood, sociality, culture and identity against the background of new communications technologies, ever more multicultural societies, enduring gender, class and race inequities, and the emergence of new and the resurgence of older forms of social and political identity. These issues are approached from the vantage of our location in southern Africa and the continent, drawing on social science perspectives.

    View more

  • Module content:

    Humanities: Text, culture and communication
    Successful communication of ideas, values and traditions depends on understanding both the literal and implied meanings of texts. In this module students are introduced to a variety of texts, including original literary and visual texts, with a view to developing an understanding of how textual meanings have been constructed and negotiated over time. Students are encouraged to understand themselves as products of – and participants in – these traditions, ideas and values. Appropriate examples will be drawn from, among others, the Enlightenment, Modernism, Existentialism, Postmodernism and Post-colonialism.

    View more

  • Module content:

    A project-based approach is followed to equip students wiuth academic and IT skills to succeed within the School of Engineering at UP.

    View more

  • Module content:

    Background knowledge, problem-solving skills, conceptual understanding and chemical reasoning skills required by CHM 171/172.

    View more

  • Module content:

    Background knowledge, problem-solving skills, conceptual understanding and mathematical reasoning skills required by WTW 158.

    View more

  • Module content:

    A project-based approach is followed to equip students with academic and IT skills to succeed within the School of Engineering at UP.

    View more

  • Module content:

    Background knowledge, problem-solving skills, conceptual understanding and physical reasoning skills required by FSK 116/176.

    View more

  • Module content:

    Background knowledge, problem-solving skills, conceptual understanding and mathematical reasoning skills required by WTW 164.

    View more

  • Module content:

    *Attendance module only
    The module is offered at the end of the first year of study and lasts at least eight days during which the students receive training in the following workshops: formwork, scaffolding, masonry, welding and structural steel.

    View more

  • Module content:

    *This module is designed for first-year engineering students. Students will not be credited for more than one of the following modules for their degree: WTW 158, WTW 114, WTW 134, WTW 165.
    Introduction to vector algebra. Functions, limits and continuity. Differential calculus of single variable functions, rate of change, graph sketching, applications. The mean value theorem, the rule of L'Hospital. Indefinite integrals, integration.

    View more

  • Module content:

    *This module is designed for first-year engineering students. Students will not be credited for more than one of the following modules for their degree: WTW 146, WTW 148 and WTW 124,

    Vector algebra with applications to lines and planes in space, matrix algebra, systems of linear equations, determinants, complex numbers, factorisation of polynomials and conic sections. Integration techniques, improper integrals. The definite integral, fundamental theorem of Calculus. Applications of integration. Elementary power series and Taylor’s theorem. Vector functions, space curves and arc lengths. Quadratic surfaces and multivariable functions.

    View more

Minimum credits: 120

Core modules

  • Module content:

    Electrical quantities, units, definitions, conventions. Electrical symbols, ideal and practical current and voltage sources, controlled sources. Ohm’s law in resistive circuits, Kirchoff’s current and voltage laws, resistors in series and parallel circuits, voltage and current division, mesh current and node voltage methods. Circuit theorems: Linearity, superposition, Thevenin and Norton equivalent circuits, sources transformation, power calculation, maximum power transfer. Energy storage elements: current, voltage, power and energy in inductors and capacitors, inductors and capacitors in series and parallel. Ideal operational amplifiers and applications: inverting and noninverting amplifiers, summing amplifiers, current sources, integrators.

    View more

  • Module content:

    This module is integrated into all undergraduate academic programmes offered by the Faculty. Main objectives: execution of a community project aimed at achieving a beneficial impact on a section of society; awareness of personal, social and cultural values and an understanding of social issues; and development of life skills. Assessment: project proposal, written progress reports, peer assessment, assessment by community, presentation, report presented in the form of a blog.

    View more

  • Module content:

    Background knowledge, problem-solving skills, conceptual understanding and reasoning skills required by EBN 111/122.

    View more

  • Module content:

    Background knowledge, conceptual understanding, drawing skills and reasoning skills required by MGC 110.

    View more

  • Module content:

    Background knowledge, problem-solving skills, conceptual understanding and reasoning skills required by NMC 113/123.

    View more

  • Module content:

    Background knowledge, problem-solving skills, conceptual understanding and reasoning skills required by SWK 122.

    View more

  • Module content:

    Freehand sketching covering the following: perspective, isometric and orthographic drawings. Drawing conventions, graphical techniques and assembly drawings. Evaluation of drawings and error detection. True lengths of lines, projections and intersections. Practical applications of these techniques. Introduction to computer-aided drawings, including dimensioning, crosshatching and detailing. Introduction to basic manufacturing processes including primary (casting, forging and extrusion) and secondary (drilling, turning, milling, grinding, broaching and sawing) manufacturing procedures.

    View more

  • Module content:

    Introduction to materials: the family of materials, atomic structure and types of bonding, crystal types and space arrangement of atoms, directions and planes in crystals, defects in crystals, diffusion in solids. Mechanical properties of materials: stress and strain, mechanical testing (strength, ductility, hardness, toughness, fatigue, creep), plastic deformation, solid-solution hardening, recrystallisation.
    Polymeric materials: polymerisation and industrial methods, types of polymeric materials and their properties. Corrosion of metals: mechanisms and types of corrosion, corrosion rates, corrosion control. The heat treatment of steel: Fe-C phase diagram, equilibrium cooling, hardening and tempering of steel, stainless steel. Composite materials: Introduction, fibre reinforced polymeric composites, concrete, asphalt, wood.

    View more

  • Module content:

    Equivalent force systems, resultants. Newton's laws, units. Forces acting on particles. Rigid bodies: principle of transmissibility, resultant of parallel forces. Vector moments and scalar moments. Relationship between scalar- and vector moments. Couples. Equivalent force systems on rigid bodies. Resultants of forces on rigid bodies. Equilibrium in two and three dimensions. Hooke's law. Trusses and frameworks. Centroids and second moments of area. Beams: distributed forces, shear force, bending moment, method of sections, relationship between load, shear force and bending moment.

    View more

  • Module content:

    Calculus of multivariable functions, directional derivatives. Extrema. Multiple integrals, polar, cylindrical and spherical coordinates. Line integrals and the theorem of Green. Surface integrals and the theorems of Gauss and Stokes.

    View more

  • Module content:

    Numerical integration. Numerical methods to approximate the solution of non-linear equations, systems of equations (linear and non-linear), differential equations and systems of differential equations. Direct methods to solve linear systems of equations.

    View more

Minimum credits: 128

Core modules

  • Module content:

    Engineering systems are often subjected to variation, uncertainty and incomplete information. Mathematical statistics provides the basis for effectively handling and quantifying the effect of these factors. This module provides an introduction to the concepts of mathematical statistics and will include the following syllabus themes: data analysis, probability theory, stochastic modelling, statistical inference and  regression analysis.

    View more

  • Module content:

    This module is given to Mining and Civil Engineering students, focused on the practical application of basic geological principles to engineering problems. The course covers basic rock identification, principles of stratigraphy and landscape formation, and engineering applications of geology such as mining, slope stability, and civil applications. Practicals cover geological maps and profiles, as well as basic rock identification.

    View more

  • Module content:

    Spreadsheet applications: Formulas and calculations, named ranges, plotting and trend lines, goal seek, linear programming, importing and exporting data, data navigation and filtering. Programming fundamentals: Names and objects, conditional and unconditional looping, branching, functions, modules, packages, reading and writing data files, graphical output (plotting). Solving simple problems using a high level programming language to develop, code and debug programs. Solving complex problems by breaking it down into a number of simple problems using concepts such as functions, modules and available packages. Programming principles are developed through solving mathematics and physics problems.

    View more

  • Module content:

    Geological origin. Soil tests and classification systems. Compaction, stabilisation. Bitumen and tar. Introduction to pavements. Overview of road building materials. Pavement design principles and methods.

    View more

  • Module content:

    Statically indeterminate beams. Virtual work. Analysis of statically indeterminate structures using the methods of super-position, slope-deflection and moment distribution (with sway and support displacement).

    View more

  • Module content:

    Stresses, strains and the mechanical properties of materials: Normal stress and shear stress, tension and compression, equilibrium in shear, factor of safety, design, shear strain, stress/strain diagram, Hooke’s Law, Poisson’s Ratio and the shear stress/strain diagram. Axial loads: Elastic deformation, displacements, statically determinate and indeterminate structures and thermal effects. Torsion: Torsion of circular bars and power transmission bending of straight members and composite beams. Transverse shear: Shear in straight members and shear flow. Combined loads: Thin walled pressure vessels and stresses as a result of combined loads. Stress transformation: Plane stress transformation, principle stresses, maximum values and stress variation in prismatic beams. Strain transformation: Plane strain transformation, principle strains, maximum values, strain gauges and rosettes and the relationship between E, G and µ. Design of beams from section characteristics. Deflection of beams: The elastic curve, integration method, Macaulay’s method and superposition.

    View more

  • Module content:

    Centroids: centroids of lines, surfaces and volumes. Second moment of area, parallel axis theorem, products of inertia, moment of inertia around inclined axes. Fluid statics: resultant forces and their points of application on flat and curve surfaces. Constraints and statical determinacy. Shear forces and bending moments in beams. Deflection of beams: derivation and integration of differential equations. Friction: friction on surfaces, wedges and screws. Vibration: free undamped vibration, free damped vibration, forced undamped vibration, forced damped vibration, natural frequency and resonance. Cables: distributed loads, parabolic and uniform cables.

    View more

  • Module content:

    Linear algebra, eigenvalues and eigenvectors with applications to first and second order systems of differential equations. Sequences and series, convergence tests. Power series with applications to ordinary differential equations with variable coefficients. Fourier series with applications to partial differential equations such as potential, heat and wave equations.

    View more

  • Module content:

    Theory and solution methods for linear differential equations as well as for systems of linear differential equations. Theory and solution methods for first order non-linear differential equations. The Laplace transform with application to differential equations. Application of differential equations to modelling problems.

    View more

Minimum credits: 154

Core modules

  • Module content:

    The behaviour, properties and application of cement and concrete products, structural steel, fibre reinforcing, polimers, masonry work and bituminuous materials.

    View more

  • Module content:

    Measurement instruments and measurement techniques used in engineering applications. Theory of the Wheatstone bridge and the application of strain gauges to measurement instruments. Accuracy, precision, resolution, hysteresis and linearity. Mechanical, hydraulic and electrical measurement instruments including load cells, pressure sensors, displacement transducers, vibration sensors, stress cells and inclinometers. Use of Arduino micro controller to read, log and plot sensor data. Elementary site survey and levelling. Coordinate systems and global positioning systems. Civil engineering monitoring programmes including planning, execution, data interpretation and reporting.

    View more

  • Module content:

    Introduction to soil mechanics. Introduction to clay mineralogy. Mass, volume relationships and phases of soil. Groundwater flow and permeability. Effective stress principles. Suction pressures in saturated as well as partially saturated soil. The Mohr circle and stresses at a point. The Mohr-Coulomb strength theory and the stress-strain properties of soil. The Boussinesq theory. Consolidation theory and soil settlement.

    View more

  • Module content:

    Application of consolidation theory. Bearing capacity of soil and foundation design, Terzaghi and general methods. Horizontal stresses in soil and design of retaining structures, Rankine and Couloumb’s methods. Slope stability including Bishop’s method of slices. Introduction to site investigation.

    View more

  • Module content:

    Fluid properties and fundamental principles of applied hydrostatic, hydrostatic forces on bodies, buoyancy and stability of bodies. Kinematics, flow rate measurement and velocity determination. Pipe flow and real fluids. Basic principles of water purification and water treatment.

    View more

  • Module content:

    Pipe network analyses and municipal services. Components of water distribution networks. Pump selection and water hammer analyses. Free surface flows and model analyses.

    View more

  • Module content:

    Self-weight, imposed and wind loads. Principles of limit-states design. Timber as a structural material, design of tension, compression and bending members (laterally braced and unbraced), beam columns, trusses and bracing.

    View more

  • Module content:

    Introduction to engineering economics: Basic guidelines, assessment of alternative investment possibilities. Equal annual cash flow, current value, internal rate of return, cost benefit relationship. 
    Economic evaluation of projects: Influence of depreciation on the economics of projects, determination of income tax implications of decisions, economic analysis of multiple alternatives, the influence of inflation on the economics of projects, application of the theory of probability for economics studies, economic studies on the replacement of equipment.

    View more

  • Module content:

    Analysis of symmetrical structures using slope-deflection equations or moment-distribution; three dimensional structures and grillages; matrix methods; influence lines. Euler buckling of columns with different boundary conditions.

    View more

  • Module content:

    Stability of beams. Material properties. Analysis and limit states design of tension, compression and flexural members, and beam-columns. Design of trusses, simple framed structures and connections.

    View more

  • Module content:

    Properties of reinforced concrete. Principles of limit states design. Analysis and design of sections in flexure and in compression combined with flexure. Design for shear and torsion. Bond and anchorage. Serviceability requirements: Detailing and span-effective depth ratios. Design of footings and short columns. Simple footings and stairs.

    View more

  • Module content:

    Communicate effectively, both orally and in writing, with engineering audiences and the community at large. Written communication as evidenced by: uses appropriate structure, use of modern or electronic communication methods; style and language for purpose and audience; uses effective graphical support; applies methods of providing information for use by others involved in engineering activity; meets the requirements of the target audience. Effective oral communication as evidenced by appropriate structure, style and language; appropriate visual materials; delivers fluently; meets the requirements of the intended audience. Audiences range from engineering peers, management and lay persons, using appropriate academic or professional discourse. Typed reports range from short (300-1 000 word plus tables diagrams) to long (10 000-15 000 words plus tables, diagrams, references and appendices), covering material at exit level. Methods of providing information include the conventional methods of the discipline, for example engineering drawings, as well as subject-specific methods.

    View more

  • Module content:

    Introduction to transportation engineering; vehicle performance and motion; traffic analysis techniques; traffic data collection; capacity and level of service analysis; railway engineering; airport capacity; geometric road design; cross-section, horizontal and vertical alignment; urban streets; layout considerations and intersection design; traffic control; traffic safety.

    View more

Minimum credits: 158

Core modules

  • Module content:

    Requirements to maintain continued competence and to keep abreast of up-to date tools and techniques. ECSA code of conduct, Continuing Professional Development, ECSA outcomes, ECSA process and reasons for registration as CEng and PrEng. Displays understanding of the system of professional development. Accepts responsibility for own actions. Displays judgment in decision making during problem solving and design. Limits decision making to area of current competence. Reason about and make judgment on ethical aspects in case study context. Discerns boundaries of competence in problem solving and design. Case studies typical of engineering practice situations in which the graduate is likely to participate.

    View more

  • Module content:

    Planning, needs assessment and performance indicators for contracts. Civil Engineering Project: client, consultant and contractors expectations and responsibilities. Tender process, construction process, application of OHS Act and Mine, Health and Safety Act, conditions of contract and claims, insurances, engineering economics, programming, costing, 1509001: quality management systems, life cycle concepts, maintenance cycle, maintenance management.

    View more

  • Module content:

    In this module commercially available computer packages will be used to develop models based on Finite Elements, Finite Differences and other approaches.   Limitations and simple checks to ensure consistency of commonly used design software packages will be illustrated.  Basic principles and techniques will be discussed and the effect of aspects such as meshing, element choice, boundary conditions and material properties will be investigated. Applications within the various fields of Civil Engineering will be considered. Results obtained from models will be compared to actual experimental results. This module will contain groupwork and multi-disciplinary problems will be solved.

    View more

  • Module content:

    The module focuses on design applications. The student is exposed to the application of the classic disciplines of structures, geotechnical, hydraulics and transportation in detail design. Supervisors select the most valuable application in each discipline. Typical examples include the following:
    • Structures: Multi storey buildings with reinforced concrete frames and slabs
    • Hydraulics: Pump lines and stations
    • Geotechnical: Slimes dams
    • Transportation: Traffic impact studies, pavement design and analysis
    The applications selected for each discipline may vary from year to year.

    View more

  • Module content:

    Regulatory framework, site investigation, site restoration, and waste disposal. Site characterization methods. Waste types and properties. Integrated environmental management processes. Environmental legislation in South Africa. Environmental impact, environmental auditing and risk analysis. ISO 140000: what it entails and how it is applied. Community participation. Municipal service delivery life cycles. Environmental management in context of project lifecycle. Project life cycle management and project management. SHEQ in the workplace

    View more

  • Module content:

    Sediment transportation, hydraulic structures, bridges and culvert hydraulics, stormwater handling. Hydrology, flood hydrology, creation of runoff records and the simulation of surface water resources, creation of stochastic sequences and the reliability analysis of surface water resources.

    View more

  • Module content:

    Analysis and design composite steel beam and concrete slab construction, Moment connections, Elastic and plastic design of portal, industrial and building structures.

    View more

  • Module content:

    Behaviour and design of beams, slabs (solid, ribbed and waffle slabs, flat plates and flat slabs), columns (slender columns and biaxial bending), footings (simple and combined footings) and stairs. Introduction to the design of prestressed concrete flexural members.

    View more

  • Module content:

    *Attendance module only
    During or at the end of the third year of study, students in civil engineering undergo at least 6 weeks of prescribed training in the industry. A satisfactory report on the practical training must be submitted to the Student Administration within one week of registration.

    View more

  • Module content:

    In the first semester, two full days of the week must be used by final-year students for the execution of an analytical and/or experimental research project.

    View more

  • Module content:

    Introduction to the basic concepts of urban and regional planning.  The planning process, policy and institutional framework in which planning functions in SA.  The interaction and co-operation of land and space, economy, politics and social aspects related to space in decision making.  Interventions for sustainable development planning and design; definitions and rationale for land-use management and the strategic integrated development planning process.  Infrastructure system evaluation, risk assessment, feasibility and decision analysis.  Life cycle costing of infrastructure.  Demand and supply analysis.  Demand forecasting models.

    View more


The information published here is subject to change and may be amended after the publication of this information. The General Regulations (G Regulations) apply to all faculties of the University of Pretoria. It is expected of students to familiarise themselves well with these regulations as well as with the information contained in the General Rules section. Ignorance concerning these regulations and rules will not be accepted as an excuse for any transgression.

Copyright © University of Pretoria 2024. All rights reserved.

COVID-19 Corona Virus South African Resource Portal

To contact the University during the COVID-19 lockdown, please send an email to [email protected]

FAQ's Email Us Virtual Campus Share Cookie Preferences