Chemical engineering involves all aspects of the industrial processes that, in the broadest sense, convert raw materials into higher-value products by means of combinations of physical, chemical, thermal, biochemical and mechanical changes. The programme provides you with the necessary foundation to ensure that once you graduate, you will be able to make creative contributions to the world’s ever-increasing needs by:
- converting natural resources into efficient and useable forms
- of energy;
- developing more durable, lighter and renewable materials;
- designing more efficient, environmentally friendly processing
- applying biotechnology to convert raw materials into products in a sustainable way;
- designing processes to ensure that limited natural resources, such as water, can be reused; and
- leaving a clean and sustainable environment behind for future generations.
A solid foundation in chemistry, physics, mathematics and biology is combined with the principles of the conservation of mass, energy and momentum, followed by the application of the economic tenets when designing equipment so as to ensure lucrative processes that will contribute to economic and industrial growth.
The programme is aimed at producing graduates who can develop new and innovative processes, ensuring continued growth to satisfy the abovementioned needs.
For more information, please consult the Faculty webpage.
- Disclaimer: This publication contains information about regulations and programmes of the University of Pretoria. Amendments to or updating of the information may be effected from time to time without prior notification. The accuracy, correctness or validity of the information contained here is therefore not guaranteed by the University at any given time and is always subject to verification. The user is kindly requested to verify the correctness of the information with the University at all times. Failure to do so will not give rise to any claim or action of any nature against the University by any party whatsoever.
Chemical engineers are involved in industrial processes that convert raw materials into products with a higher economic value. This is achieved by means of physical, thermal, chemical, biochemical and mechanical changes and processes. Chemical engineers apply their specialised knowledge in the petroleum, food, minerals processing, power generation, and the paper and pulp industries, water and effluent treatment, as well as environmental engineering activities, including air pollution control. Like other engineering disciplines, chemical engineers are involved in research and development, techno-economic evaluation, equipment and plant design, process control and optimisation, construction, commissioning, operation and management as well as marketing and distribution of final products.
- SA – 21/06/2021
- Non-SA – 21/06/2021
Important information for all prospective students for 2022
- The admission requirements apply to students who apply for admission to the University of Pretoria with a National Senior Certificate (NSC) and Independent Examination Board (IEB) qualifications.
- Applicants with qualifications other than the abovementioned should refer to:
- Brochure: Undergraduate Programme Information 2022: Qualifications other than the NSC and IEB, available at click here.
- Citizens from countries other than South Africa (applicants who are not South African citizens) should also refer to:
- School of Tomorrow (SOT), Accelerated Christian Education (ACE) and General Education Development Test (GED): The University of Pretoria no longer accepts qualifications awarded by these institutions.
- National Certificate (Vocational) (NCV) Level 4: The University of Pretoria may consider NCV candidates, provided they meet the exemption for bachelor’s status criteria and the programme requirements.
A transferring student is a student who, at the time of application for a degree programme at the University of Pretoria (UP) –
- is a registered student at another tertiary institution, or was previously registered at another tertiary institution and did not complete the programme enrolled for at that institution, and is not currently enrolled at a tertiary institution, or has completed studies at another tertiary institution, but is not currently enrolled at a tertiary institution, or has started with tertiary studies at UP, then moved to another tertiary institution and wants to be readmitted at UP.
A transferring student will be considered for admission based on
- an NSC or equivalent qualification with exemption to bachelor’s or diploma studies (whichever is applicable); and meeting the minimum faculty-specific subject requirements at NSC or tertiary level; or having completed a higher certificate at a tertiary institution with faculty-specific subjects/modules passed (equal to or more than 50%), as well as complying with faculty rules on admission;
- previous academic performance (must have passed all modules registered for up to the closing date of application ) or as per faculty regulation/promotion requirements;
- a certificate of good conduct.
Note: Students who have been dismissed at the previous institution due to poor academic performance, will not be considered for admission to UP.
A returning student is a student who, at the time of application for a degree programme –
- is a registered student at UP, and wants to transfer to another degree at UP, or was previously registered at UP and did not complete the programme enrolled for, and did not enrol at another tertiary institution in the meantime (including students who applied for leave of absence), or has completed studies at UP, but is not currently enrolled or was not enrolled at another tertiary institution after graduation.
A returning student will be considered for admission based on
- an NSC or equivalent qualification with exemption to bachelor’s or diploma studies (whichever is applicable); and meeting the minimum faculty-specific subject requirements at NSC or tertiary level; or previous academic performance (should have a cumulative weighted average of at least 50% for the programme enrolled for);
- having applied for and was granted leave of absence.
Note: Students who have been excluded/dismissed from a faculty due to poor academic performance may be considered for admission to another programme at UP. The Admissions Committee may consider such students if they were not dismissed more than twice. Only ONE transfer between UP faculties will be allowed, and a maximum of two (2) transfers within a faculty.
Important faculty-specific information on undergraduate programmes for 2022
- The closing date is an administrative admission guideline for non-selection programmes. Once a non-selection programme is full and has reached the institutional targets, then that programme will be closed for further admissions, irrespective of the closing date. However, if the institutional targets have not been met by the closing date, then that programme will remain open for admissions until the institutional targets are met.
- The following persons will be considered for admission: Candidates who have a certificate that is deemed by the University to be equivalent to the required National Senior Certificate (NSC) with university endorsement; candidates who are graduates from another tertiary institution or have been granted the status of a graduate of such an institution, and candidates who are graduates of another faculty at the University of Pretoria.
- Life Orientation is excluded when calculating the APS.
- Grade 11 results are used for the conditional admission of prospective students.
- A valid qualification with admission to degree studies is required.
- Minimum subject and achievement requirements, as set out below, are required.
- Admission to ENGAGE in the School of Engineering will be determined by the NSC results, achievement levels of 5 for Mathematics, Physical Sciences and English, and an APS of 30.
- Students may apply directly to be considered for the ENGAGE programme.
- All modules will be presented in English, as English is the language of tuition, communication and correspondence.
Note: Our programmes are accredited by the Engineering Council of South Africa (ECSA), and our degrees meet the requirements for Professional Engineers in SA.
University of Pretoria website: click here
English Home Language or English First Additional Language
Duration of study
5 years, full-time.
The Faculty of Engineering, Built Environment and Information Technology at the University of Pretoria is a leading source of graduates in the engineering, built environment and information technology professions. We achieve this by a focus on research to drive innovative and enquiry-led teaching for educating and positioning our students to be leaders in their professions. The Faculty has extensive and cutting-edge teaching, learning and laboratory facilities integrated with the excellent suite of facilities and services offered by the University. We facilitate access to our qualifications through our extended ,programmes but expect our students to excel and develop as future professionals through our programme offering. We invite you to consider enrolling in one of our programmes if you share our vision of excellence and want to position yourself as a leader in the professions that we support.
The Faculty is organised in four schools: the School of Engineering, the School for the Built Environment, the School of Information Technology and the Graduate School of Technology Management. The School of Engineering is the largest of its kind in the country in terms of student numbers, graduates and research contributions and offers programmes in all the major engineering disciplines with many specialisations also offered at undergraduate and graduate level.
The University of Pretoria aims to be internationally competitive while also locally relevant. Advisory boards at both faculty and departmental level promote alignment and excellence in our teaching and research activities. Where applicable and available our programmes are accredited by statutory and professional bodies at both national and international level.
Enquiries about the programme