Yearbooks

Programme: BEngHons (Engineering and Technology Management)

Kindly take note of the disclaimer regarding qualifications and degree names.
Code Faculty Department
12240252 Faculty of Engineering, Built Environment and Information Technology Department: Engineering and Technology Management
Credits Duration NQF level
Minimum duration of study: 1 year Total credits: 128 NQF level:  08

Programme information

The BEngHons (Engineering and Technology Management) degree is conferred by the following academic department: Engineering and Technology Management.

The stipulations of Faculty Regulations for honours degrees apply.

Any specific module is offered on the condition that a minimum number of students are registered for the module, as determined by the relevant head of department and the Dean. Students must consult the relevant head of department in order to compile a meaningful programme, as well as on the syllabi of the modules. The relevant departmental postgraduate brochures must be consulted.

Selection
A selection procedure takes place prior to admission to any programme in the GSTM Restrictions may be placed on the number of students admitted to the School. Postgraduate selection takes place as stipulated in the respective departmental rules. (www.up.ac.za/gstm)

Minimum/Maximum study period
The minimum period of study for the degree is indicated at the relevant degree programme. Students registering for the honours degree, must complete the degree in a maximum of two years. 

Admission requirements

  1. BEng degree awarded by a South African university with first-year Mathematics or accredited  Washington Accord BEng degree with first-year Mathematics

More information:

www.up.ac.za/gstm/etm

 

Examinations and pass requirements

Refer also to G18 and G26.

  1. The  examination in each module for which a student is registered, takes place during the normal examination period after the conclusion of lectures (i.e. usually October/November or May/June).
  2. G18(1) applies with the understanding that under exceptional circumstance an extension of a maximum three years may be approved: provided that the Dean, on recommendation of the relevant head of department, may approve a stipulated limited extension of this period.
  3. A student must obtain at least 50% in an examination for each module where no semester or year mark is required. A module may only be repeated once.
  4. In modules where semester or year marks are awarded, a minimum examination mark of 40% and a final mark of 50% is required.

Pass with distinction

A student passes with distinction if he or she obtains a weighted average of at least 75% (not rounded) in the first 128 credits for which he or she has registered (excluding modules which were discontinued timeously). The degree is not awarded with distinction if a student fails any one module (excluding modules which were discontinued timeously). The degree must be completed within the prescribed study period. 

Minimum credits: 128

Select at least 2 elective modules to the value of 32 credits.

Core modules

  • Module content:

    The research project is the capstone of the MOT programme. It comprises an independent research study into an area of technology management, applying the principles learned during the programme. Although this is a research project of limited breadth and scope, it nonetheless has to comply with the requirements of scientific research on post-graduate level. The total volume of work that is to be invested in this module by an average student must be 320 hours. Normal requirements for assessment that include the use of an external examiner apply to this module.

    View more

  • Module content:

    Engineering Economy assists the engineer in making a wide range of decisions. These decisions involve the fundamental elements of monetary cash flow, time, value of money, project life and the interest rate. Engineering Economy calculates the net present worth, future worth, annual equivalent worth and the internal rentability of the cash flows of the alternatives under consideration. By applying these values in different ways, the most economical alternative can be identified. Calculation of these values for a cash flow takes into account the effective interest rate, inflation and the income tax payable.

    View more

  • Module content:

    In an increasingly competitive and fast changing business world the management of technological innovation is a key function of organisations that want to prosper. It is therefore important that engineers, scientists and managers understand the fundamental principles of technology and innovation. This module addresses aspects such as the activities and tools of technology management and the processes and dynamics of innovation as important contributors to the creation of new knowledge, products and processes.

    View more

  • Module content:

    This module addresses basic project management concepts, principles and techniques. The module is aligned with both the U.S. Project Management Institute’s Project Management Body of Knowledge (PMBoK) as well as PRINCE2 methodology developed in the UK. Scheduling of projects is a core element of project management and IPK780 covers project scheduling in somewhat more detail and at a more advanced level than the other topics.

    The aim of the module is to develop the learner’s ability to identify and solve problems in a way that display critical thinking and the application of quantitative methods. The module focuses on project initiation, planning, monitoring and control. Specifically the development of a project plan, different scheduling techniques, earned value, decision making and basic risk management. A deliverable of the module is a project plan (including project scope, WBS, schedule, risk management plan and cash flow) for a project in the learner’s work environment.

    View more

  • Module content:

    A company's ability to remain competitive in modern times hinges increasingly on its ability to perform systems engineering. The technology and complexity of a company's products appears to steadily increase and with it, the risks that need to be managed. This module provides specialised knowledge to apply systems engineering by understanding the tools, processes and management fundamentals.

    View more

Elective modules

  • Module content:

    Technical solutions can overcome various problems confronting the world, but new business leaders need to emerge by identifying these potential opportunities that can lead to sustainable enterprises with more employment opportunities. The module highlights the role of technology innovation and strategy in entrepreneurship, the development of business models and plan, the lean start-up principle, legal aspects and venture leadership. Entrepreneurship is an intellectual discipline in its own right with its own systematic methods and techniques that can be learned and mastered through professional practice and hard work. This module will equip you with the fundamentals of technological entrepreneurship that can be applied in new ventures or your existing career.

    View more

  • Module content:

    Every man-made component, spare part, equipment, system or infrastructure has an inherent reliability that is determined by design, construction, installation, manufacture or how it is built. This inherent reliability is influenced by both organisational and physical conditions under which, for example, an item of equipment operates. The operational reliability significantly determines the availability of the equipment. A primary objective of maintenance intervention is to eliminate the operating environment hazards, which reduce the operational reliability of equipment and consequently, the availability of equipment for use. In the event of malfunction or failure, the goal of maintenance is to restore the operational reliability and availability of an item of equipment. Irrespective of whether a maintenance activity is intervening or restorative, it needs to be properly planned, scheduled and executed towards achieving the highest levels of operational reliability and availability, whilst concurrently minimising the expenditure of time and resources. Organisational systems of work (which encompass business processes, culture, and information technology) greatly influence the planning, scheduling and execution of maintenance activities. Furthermore, knowledge of technologies embedded, as well as how various items of equipment malfunction or fail in operation, determines how well the maintenance activities are planned, scheduled and executed. The content of the module not only covers strategies, technical principles, practical processes and systems but also includes standards (e.g., CEN13306) and legislative guidelines that influence the management of maintenance in all industrial sectors. The content will also include an introduction to the ISO 5500x asset management standards.

    View more

  • Module content:

    Operations management develops the ability of students to think about the transformation processes in organisations in a global way. The emphasis is on learning how to improve operating systems significantly through maximising throughput and minimising costs. The understanding of operating systems is developed from a flow- as well as an effect-cause-effect perspective.

    View more


Regulations and rules
The regulations and rules for the degrees published here are subject to change and may be amended after the publication of this information.

The General Academic Regulations (G Regulations) and General Student Rules apply to all faculties and registered students of the University, as well as all prospective students who have accepted an offer of a place at the University of Pretoria. On registering for a programme, the student bears the responsibility of ensuring that they familiarise themselves with the General Academic Regulations applicable to their registration, as well as the relevant faculty-specific and programme-specific regulations and information as stipulated in the relevant yearbook. Ignorance concerning these regulations will not be accepted as an excuse for any transgression, or basis for an exception to any of the aforementioned regulations.

University of Pretoria Programme Qualification Mix (PQM) verification project
The higher education sector has undergone an extensive alignment to the Higher Education Qualification Sub-Framework (HEQF) across all institutions in South Africa. In order to comply with the HEQSF, all institutions are legally required to participate in a national initiative led by regulatory bodies such as the Department of Higher Education and Training (DHET), the Council on Higher Education (CHE), and the South African Qualifications Authority (SAQA). The University of Pretoria is presently engaged in an ongoing effort to align its qualifications and programmes with the HEQSF criteria. Current and prospective students should take note that changes to UP qualification and programme names, may occur as a result of the HEQSF initiative. Students are advised to contact their faculties if they have any questions.

Copyright © University of Pretoria 2024. All rights reserved.

FAQ's Email Us Virtual Campus Share Cookie Preferences